1. universal input voltage range 2. high efficiency 3. low ripple and noise 4.OCP OVP

AP139

Overview

Total power: 68Watts

Main Input : 90 - 264VAC

# of Outputs: Single

Dimention: 140 x 76 x 46.5 mm(5.512"x2.992"x1.831")

Special Features

• Universal input

• Access control application

• Smart alarm funtion and LED indicator

• Intelligent lithium battery management

• Natural convection cooling

• Input overvoltage protection

• Overvoltage protection, overcurrent protection and overload protection

• Short circuit protection

• Built-in Class B EMI filter

• 100% burn-in test

• MTBF: 100K hours at 25°C

Electronical Specifications

Input

……………………………………………………………………………………………………………………………………………………….

• Input range 90-264Vac

• Input current 1A peak @220Vdc; 2A peak @220Vdc

• Overvoltage protection 270-295Vac

• Efficiency :83% at full load

Output

……………………………………………………………………………………………………………………………………………………….

• Main output 13.65V@5A

• Power range 0-68Watts

• Regulation ±5%

• Ripple and noise 150mV p-p

• Setup, rise, hold-up time 3s, 20ms, 10ms

• Overvoltage protection 16.5-17.5Vdc above nominal output

• Short circurt protection Hiccup mode, recovery after removal of failure

Logical control

……………………………………………………………………………………………………………………………………………………….

• AC OK LED indicates input power ON and battery within normal status.

• LED indicator Triple LEDs, Red indicates charging ON, Yellow for charged.

Dielectric Withstand

……………………………………………………………………………………………………………………………………………………….

• Input to Output 3000VAC /30mA /1min

• Input to FG 1800VAC /10mA /1min

• Output to FG 500VAC /10mA /1min

Environmental Specifications

• Operating temperature 0°C to 60°C(typical 25°C)

• Storage temperature -20°C to 80°C(typical 25°C)

• Humidity 10 to 95%RH, non-condensing

• Safety Designed to meet UL60950, EN60950

• EMC Designed to meet CISPR 22(1998),FCC part 15 Class B conducted and radiated

power supply