*In Europe standard,input voltage: 230Va.c. *ROHS *CE *multi-used in AA AAA 9V battery

1.INPUT 

1.1   Input voltage: 230Va.c.

1.2   Input current:18mA

2.OUTPUT

AA     2.8Vd.c. 135mA     

AAA   2.8Vd.c   60mA

9V     9.8V d.c  17mA

3.CHARACTERISTIC

3.1  Suitable for Ni-MH or Ni-Cd battery.

3.2  Charge 2 or 4PCS AA/AAA or 1-2pcs 9v rechargeable batteries.

3.3  Charge with the function of constant current.

4.OPERATING INSTRUCTION

4.1   Insert the battery into the battery compartment with correct direction of polarity.

4.2   Plug the charger into a.c. outlet.

4.3   LED indicates the status of the batteries.

4.3.1   left LED indicates the status of the left and right two batteries in the charger.

4.3.2   right LED indicates the status of the 9V batteries in the charger.  

           Red LED indicates the battery in the left of charger  are charging.   

           Green LED indicates the battery in the right of the charger are charging.

           Orange LED indicates the two batteries are charging both.

4.5   When the time is enough ,Please put out the batteries after cut off the power.

5.ENVIRONMENTAL

5.1   Operating temperature: 0°C to  35°C ambient

5.2   Storage temperature: -20°C to  80°C 

5.3   Operating humidity:20% to 90% RH

5.4   Storage humidity: 20% to 90% RH

6.CAUTION

6.1 Indoor use only. Do not expose the charger to rain or   moisture.

6.2 The charger is intended for use with Ni-Cd and Ni-MH batteries only. Attempt to charge other            type of batteries may cause personal injury and damage to charger.

6.3 Do not remain the cells in the battery in fire or disassemble.

6.4 Replace the battery when its capacity reduced seriusly.

7.CHARGE TIME

Battery capacity (mAh)	Approximate charge time (hours)
AA2000	19
AA1600	15
AA1300	12
AAA700	15
AAA850	18
9V160	12

8.MECHANICAL SPECIFICATION

8.1  Plastic case: Refer to sketch below

8.2  Dimension: L118×W75×H47

8.3  Weight:  88.5g/pcs

PH-02L4E Battery Charger