Y series Industrial Electric Motor
Factory Gate
Introduction
Y series Industrial Electric Motor.Mounting dimensions and rated outputs are conformed with IEC. IP44 degree of protection,cooling method is IC411,
continuous duty (S1).Y series motors can drive various kinds of mechanical equipments,such as machine tool,pump,blower,mixers,conveying machinery,agricultural machinery,anf food machinery,etc.
The insulation of the frame sizes 80-315 is class B,and of 355 is class F,rates voltage id 380,rated frequency is 50Hz.For motors of 3KW and below the stator windings are connected in "Y" while for those of other power they are in "Δ".At an operation place,an altitude above sea level should not exceed 1000m.And ambient temperature varying with season should be not over 40°C and not below -15°C.The highest monthly average relative humidity in the most humid moth should be 90% while the monthly mean lowest temperature not over 25°C.
Customized
Y series Industrial Electric Motor have one shaft extention,but two shaft extentions may be made on request.The secons shaft extention can drive rated load,but connects load by coupling only.
We can provide motors with other rated outputs,voltage,frequency,degree of protection and humid-tropic type(TH),ETC.
Advantage
Y-series Industrial Electric motors(frame size 80-355) accord with Y-SERIES(IP44) THREE PHASE ASYNCHRONOUS MOTOER OF NATIONAL STANDARD JB/T10391-2008.
High locked torgue,safe operation,high reliability,low noise and vibration.
Mounting arrangement
Contour dimension
Order information
When ordering,the following requirement sshould be specified:
1.rated power
2.rated voltage
3.synchronous speed
4.mounting type
5.protection degree
6.cooling methord
7.insulation class
8.ambient:elevation,temperature
Y Series Industrial Electric Motor