Welcome to ECVERY
LCR-100----1M card reader, reading 125KHZ cards
LCR-100----1M card reader, reading 125KHZ cards
Supplier Info
[China Supplier]
Contact Person : Mr. Lu Ben
Tel : 86-755-82813105
Fax : 86-755-83626790
Product Detail
LCR-100: 1M long range reader Waterproof

Features

 

   High sensitivity and reliable performance;   Built-in transceiver antenna for maximum performance;   Maximum effective distance up to 1000mm;   Less than 100ms decoding time;   Low power dissipation with single power supply;   Multiple output format optional;   Built-in buzzer;   Built-in external LED control;   Potted for environmental protection.

 

 

 

 

 

 

3. Specifications

 

Power Requirements                                +12Volts linear regulated DC at 200mA typical, 250mA max. Interface      Wiegand or other optional

Typical Maximum Read Range                 Range 1000mm with ISO card

(In ideal conditions)

Frequency                                                  125KHz typical

Transponder                                              Read Only

Audio/visual Indication                            Buzzer output with external

LED control

 

 

4. Interface

 

Color

Description

Red

+12VDC

Black

GND

Green

DATA0

White

DATA1

Brow

HOLD

Yellow

External LED control(Internal 2K pulled-up)

 

 

 

 

 

5. Trouble Shooting

 

When powered up, LCR-100 long range  reader  take a self-test to ensure the best reading performance with the buzzer beeping continually. When the self-test ends, the buzzer will give out a long beep and the LCR-100 enter the normal working mode.  If  the  buzzer  continue  beeping  without  stop  for  a  long  time,  please  turn  off  the  power  and  check  out  the environment and power supply to ensure locating the LCR-100 in a good working condition. In case of problems the following procedure should be followed:

Failure to finish self-test with the buzzer beeping continually or with a short reading distance

1) Turn off the power to the Rhombus100;

2) Check the power input connections making sure that they are not reversed;

3) Check the power supply complying with the specification;

4) If the supply has a current limit, set this to 350mA;

5) Make  sure  to  install  the  Rhombus100  in  a  environment  without  large  area  conductors  nearby  or  mounting  on  a conductive surface. In self-test state, do not apply any tags in   functional area;

6) Try to change the installment of LCR-100 to another place to check if the trouble still exists;

 

  

 

 

 

LCR-100----1M card reader, reading 125KHZ cards

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.