Proximity Access Card Reader 1:WG 26 and WG32 2:work with access control board 3:connect with power supply 4:Grade A quality

Customized Proximity Access Card Reader with WG 26 and 32 output

PCD 101 Proximity Card ReaderCard Type: EM-ID Card /125KHz(Mifare format /13.56MHz is option

Brief introduction of product:

When the card approach the reader, the red light turn into green, after glinting to turn red color again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity area, Reader can do response continually and send out the data.

Model	PCD-101
Size	122 x 46x 23mm
Color	Dark Grey
Voltage	DC5~16V
Current	≤100mA
Ambient Temperature	-25°C~75°C
Reading Range	5~15CM
Output Format	Wiegand 26/34,RS485/232
Card Type	EM-ID/Mifare-IC
Comunication Distance	WG≤100M,RS485≤1200M

 Notice:

 1:Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply. 2:When external Power is used, make sure sharing the power with Controller Box or using the same GND. 3:When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.

Diagram:

This is WG 26 output

Red---12VBlack—GND

Green---Date 0

Yellow—Date 1

This is WG 32 output

Red---12VBlack+Grey—GND

Green---Date 0

Yellow—Date 1

If you need to install to a metal place, pls use a magnetic fabric to cover..

Customized Proximity Access Card Reader with WG 26 and 32 output