Welcome to ECVERY
Wireless remote control for fishing boat
Wireless remote control for fishing boat
Supplier Info
[China Supplier]
Contact Person : Mr. Yin Mike
Tel : 86-0755-27593269,13148759737,13682630429
Fax : 86-0755-27840581
Product Detail
1.Working frequency: 433MHZ 2.Modulation manner: FSK 3.Working current: 20mA 4.Working voltage: 12V

Technology spec

transmitter

Working frequency: 433MHZ

Modulation Manner: FSK

Static state current: 10uA

Transmitter current: <100ma

Working temperature: -40~85°C

Storage temperature: -50°C~100°C

Working voltage: 4.5V (3 No.7 batteries with 1.5V)

receiver

Working frequency: 433MHZ

Modulation manner: FSK

Available control for distance(open air): >500m

Working current: 20mA

Working temperature: -40~85°C

Storage temperature: -50°C~100°C

Working voltage: 12V

The function of the remote contro.

 1.4 keys control forward, turn left, turn right, reverse

 2 keys control left and right machine that can supply feed.

3. 1 key controls the front head lamp (press one time, it’s on, and press again, it’s off)

4. 2 keys control left and right machine that can put down fishhook.

5. I key is standby

The spec description of remote control boat

Go forward control

Press the forward key on the receiver, the boat goes forward. Loose it, the boat moves on. Press the forward key again, stop

Control manner:

The receiver controller receives the forward signal and start the left and right drive machine and turn positive, remote control boat go forward.After the receiver controller send out the signal to go forward, it will send out a confirmative signal to go forward timely each 2 seconds.The receiver controller receive confirmative signal to go forward from remote control transmitter ceaselessly, and move on.If the receiver controller doesn’t receive confirmative signal to go forward from remote control transmitter within 6s, the receiver controller will stop going on, and autocontrol retreat 10s. (If it doesn’t receive the confirmative signal to go forward from transmitter, means it leaves the maximum scope that the transmitter controller can control, so, auto retreat for 10sis convenient.)During the process of controlling automatic retreat, if the receiver controller receives any available control signal from transmitter, automatic retreat operation stop, instead by hand operation.When automatic retreat, the left and right turning lights flash one time per second at the same time.Turn off the left and right machine input when it stops.Retreat control

Press the retreat key on transmitter, boat retreats, loose the key, stop retreating.

Control manner:

Receiver controller turn on left and right machine at the same time and turn reverse, remote control boat retreats.When retreat, the left and right turning lights flash one time per second at the same time.

3.  Turn off the left and right machine input when it stops.

Left turning control

     Press the left turning key on transmitter, boat turn left, loose it, stops.

     Control manner:

Receiver controller only turn on the left machine and turn positive, turn off the right machine, remote control boat turning left.During the process of left turning, the left turning light flashes one time per second.Turn off the left and right machine input when it stops.Right turning control

     Press the right turning key on transmitter, boat turn right, loose it, stops.

     Control manner:

Receiver controller only turn on the right machine and turn positive, turn off the left machine, remote control boat turning right.During the process of right turning, the right turning light flashes one time per second.Turn off the left and right machine input when it stops.Left control for give out lure

Press the left key for give out lure on transmitter for 2s, the left lure box gives out lure one time.

Control manner:

Receiver controller turns on the left machine for five out lure and turn positive 5s.After 5s, turn off output and keep for 2s.Turn on left lure machine and turn reverse for 4.8s, the process of giving out lure finished.During the process, left and right turning lights flash one time per second. Right control for give out lure

Press the right key for give out lure on transmitter for 2s, the right lure box gives out lure one time.

Control manner:

Receiver controller turns on the right machine for five out lure and turn positive 5s.After 5s, turn off output and keep for 2s.Turn on right lure machine and turn reverse for 4.8s, the process of giving out lure finished.During the process, left and right turning lights flash one time per second.Headlight control

     Before turning off the headlight, press the headlight key on transmitter one time and it lights; When the headlight is on, press the headlight key on transmitter one time and it off.

Standby output control one

Press left fishhook key for 2s, the left fishhook machine turn; Loose it, stops.

 Standby output control two

Press right fishhook key for 2s, the left fishhook machine turn; Loose it, stops.

The code set between transmitter and receiver

Every transmitter has different ID.  In order to letting transmitter and receiver controller use together, we use this operation process to finish the code matching between receiver and transmitter.

Electrify the receiver and transmitter.Press code key on receiver 2s, then headlight lights, means come into a leaning code-matching state.Press any key on transmitter, then press code-matching key on receiver for 2s.After receiver gets the signal from transmitter, the headlight flashes 2 times, confirm that transmitter has code with receiver successfully, then we can use the code-matching transmitter to control receiver.If it needs to code receiver and other transmitter, please repeat the approach 2-4 operation; Each receiver can code with 8 transmitters maximum.If receiver has coded 8 transmitters, press code key again and comes into code state, loose code key, the headlight flashes 6 times, means can not code with more transmitter; If want to code new transmitter, please clear all transmitters that have coded.

  

Through the following operation clear all transmitters ID on receiver that have coded.

Electrify the receiver Press receiver code key, 2s later headlight lights, means comes into learning code state.Continue to press code key until 10s, headlight flashes 4 times, means elimination is finished.Key operationIt is available when press one key, and not available for many key.After press the go forward key to control forward, transmitter send out confirmative signal to go forward each 2s timely. After press forward, retreat, left turning, right turning, stop the transmit confirmative signal timely.

Wireless remote control for fishing boat

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.