Ads by Google
Wireless Electronic Switch
PE-8903 is wireless electronic switch which adopts wireless RF technology and control the switches without direction limitation. Each switch has specific ID address. The effective distance between the switch and the remote control is more than 50m. This device can also work with control panel, it can be controlled by both the control panel and remote control.
Features:
Input voltage: 220V ACPower consumption: 2WMax current capacity: 2AMax power capacity: <500WOperation mode: wireless remote control or manualEffective distance: >50mStable performance / easy to installWireless emitting frequency: 433MHzDimension is 87*87*45mm / ivory white colorJumper Switch Instruction:
MODEL 1, MODEL 2 and MODEL 3 are programmable jumper, setting the work modeShort circuit model: when power off, the switch keep the turn on / off status as set;Open circuit model: when power off, the switch turn off automatically.Button Function Instruction:
Operation: press the button for turn on / off, meanwhile the LED turn on / off;Register the electronic switch to control panel (when MODEL 5 set as “Open Circuit”): press the corresponding button for more than 20 seconds then release, it will send signal to control panel (at this time corresponding LED will twinkling)Notice: pressing button time should be more than 20 seconds, otherwise the registration will be invalid.
Register the electronic switch to the remote control: press all the buttons for more than 20 seconds (at this time all LED will twinkling), then release (all LED twinkling by turns). Press all the buttons and trigger the remote control. Repeat the process to register next remote control (total 48 remote controls can be registered).Delete the registered electronic switch: press all buttons for more than 60 seconds, all LED twinkling fast, then electronic switch will delete the registered code.Wireless Electronic Switch