Double side PET film tape/Hot melt double sided adhesive tape/Polyester film tape
Based on transparent PET, it is coated on both sides with high performance acrylic or hot melt adhesive. Thinner than double sided tissue tape, it has characters of anti-humidity/heat/steam/UV, long time adhering, anti-aging, static shear resistance, with no plasticize migration on most surface.
Features: 1. High tack and good holding power. 2. Can be applied on different surfaces(PVC/ABS/PC/aluminium), fit for radian surface. 3. High tack and good holding power. 4. Can be applied on different surfaces(PVC/ABS/PC/aluminium), fit for radian surface.
Usage: Adhere laminating nameplate, foam material, membrane switch. The double sided PET has good optical performance and is used in making LCD screen frame, nameplate or fasteners.
Spec.: Jumbo roll:1040mm x 1000m
Slitting roll: width/length upon request
PHYSICAL DATA | |||||||
Description | Double sided film tape | ||||||
Backing | BOPP/PET | ||||||
Adhesive | Water-based acrylic Hot melt Solvent-based acrylic | ||||||
Tack | ≥12# ≥6# ≥8# | ||||||
Holding power | ≥24hrs ≥4hrs ≥24hrs | ||||||
180°peeling | ≥8N/25mm ≥12N/25mm ≥10N/25mm | ||||||
Temperature resistance | 70°C 40°C 90°C | ||||||
Tensile strength | over 30N/25mm | ||||||
Elongation % | below 180% | ||||||
Thickness | 80-100mic | ||||||
Color | clear | ||||||
Note: The above technical parameters only served as typical or representative, and do not constitute any guarantee or responsibility. |
Double side PET film tape/Hot melt double sided adhesive tape/Polyester film tape