JinHui threadlocking adhesive are widely used for sealing, locking and corrosion resistance of threaded fasteners in various environments, can replace spring washers, pins and other traditional mechanical locking methods.
JH222 Threadlocking Adhesive
1 Low viscosity,thixotropic viscosity
2 Suitable for most metal surfaces, parts can be disassembled with hand tools.
3 Ideal for fasteners diameters of M12 and smaller, controlled lubricity, can attain accurate clamp loads.
JH242 Threadlocking Adhesive
1 General purpose, medium strength,thixotropic viscosity.
2 For locking and sealing M6-M20 threads.
3 Parts can be separated with hand tools,controlled lubricity, can attain accurate clap loads.
JH243 Threadlocking Adhesive
1 Oil resistance,medium strength.
2 Fast curing, used on inert surface, improves oil tolerant, easy to disassemble, can be applied on surfaces with oil.
3 For fasteners smallers than M20
JH262 Threadlocking Adhesive
1 High strength
2 Thixotropic viscosity, excellent chemical resistance.
3 Suitable for most metal surfaces, for fasteners smaller than M20.
4 A permanent threadlocker.
5 Excellent for preventing rust and corrosion in extreme chemical environmental conditions.
JH271 Threadlocking Adhesive
1 High strength, low viscosity
2 For permanent locking and sealing, fasteners smaller than M36.
JH272 Threadlocking Adhesive
1 High temperature resistance,high strength.
2 Withstand temperatures up to 230°C.
3 For locking and sealing the thread of cylinder without being cleaned.
4 Provides a fast cure on most surfaces, including “as received” fasteners.
5 Recommended for bolts up to M36.Heating and hand tools are required for disassembly.
JH277 Threadlocking Adhesive
1 High strength, high viscosity.
2 Excellent chemicals resistance.
3 For permanent locking and sealing, bolts up to M36.
4 Prevent rust and corrosion of threaded fasteners. Heating and hand tools are required for disassembly.
JH290 Threadlocking Adhesive
1 Medium strength, low viscosity, fast curing.
2 For locking and sealing pre-assembled bolts M2-M12.Also for sealing welds and porous metal parts.
3 Prevent rust and corrosion. Heating and tools are required for disassembly
Technical Specification
Product | Container | Color | Viscosity(mPa.s) | Prevail torque(N.m) | Break torque(N.m) | Gap fill(mm) | Temperature(°C) | Fixture time/full cure time(min/h) |
JH222 | 10ml/50ml/250ml | Purple | 1200~5000 Thixotropic | 4 | 6 | 0.13 | -54~149 | 20/24 |
JH242 | 10ml/50ml/250ml | Blue | 1200~6000 Thixotropic | 4.8 | 12 | 0.13 | -54~149 | 20/24 |
JH243 | 10ml/50ml/250ml | Blue | 2250~12000 Thixotropic | 7 | 20 | 0.13 | -54~149 | 20/24 |
JH262 | 10ml/50ml/250ml | Red | 1800~5000 Thixotropic | 22 | 22 | 0.13 | -54~149 | 20/24 |
JH271 | 10ml/50ml/250ml | Red | 500 | 31 | 25 | 0.13 | -54~149 | 20/24 |
JH272 | 10ml/50ml/250ml | Red | 9500 | 25 | 23 | 0.25 | -54~230 | 30/24 |
JH277 | 10ml/50ml/250ml | Red | 7000 | 32 | 32 | 0.25 | -54~149 | 30/24 |
JH290 | 10ml/50ml/250ml | Green | 12 | 29 | 10 | 0.10 | -54~149 | 20/24 |
Acrylic adhesives 271 threadlocking adhesives 271