C2TES2 Flex Cement for Tile Setting Two component, highly deformable high adhesion easy to trowel with no vertical slip C2TES2 Flex Cement for Tile Setting Product InformationFlex Cement for Tile Setting may be used to fix tiles onto plasterboard, fiber cement sheeting, timber floorboards, structural composition board or marine grade ply, concrete, cement renders/screeds, brickwork, blockwork, old ceramic tiles and particular waterproofing membranes.For treated timbers, hardwood timbers or timbers which exude resins/tannins, initially install a fiber cement sheet tile underlay.C2TES2 Flexible Porcelain Tile Adhesive is recommended for the thin or thick bed fixing of all types of ceramic, mosaic, fully vitrified, porcelain, terracotta, slate, quarry, granite and marble tiles with the exception of light colored or green marble.When using C2TES2 Flexible Porcelain Tile Adhesive with translucent/ absorbent tiles, the color of the adhesive must be considered, so as to avoid discoloration problems.GROUTING & SEALINGThe tile joints may be grouted after 8-12 hours when laid on walls and after 24 hours when laid on floors using a special GOMIX cementitious or epoxy grout, which are available in a range of colors.CONSUMPTIONNotched trowel Coverage per/m²3 x 3 mm app. 1.6 kg6 x 6 mm app. 2.7 kg8 x 8 mm app. 3.5 kg10 x 10 mm app. 4.5 kgPACKAGINGC2TES2 Flexible Porcelain Tile Adhesive is available in 25kg bag with 2.5kg drum.STORAGE12 months in its original packaging in a dry place.TECHNICAL DATA SHEET

FORM	Powder
POTLIFE	Approx. 120 minutes @ 20°C
OPEN TIME	30 minutes@ 20°C
COVERAGE	5– 6m2/25kg bag @3mm bed
TENSILE ADHESION STRENGTH	≥1.7MPa under all test conditions
Adjustability Time	Approximately 45 minutes
EARLY TENSILE ADHESION STRENGTH	≥1.5MPa after 6 hours
CLASSIFICATION	BS EN 12004 Type C2TES2

C2TES2 Flex Cement for Tile Setting-high bond strength, high flexibility, for all sizes floor tiles, and large sizes wall tiles