Ads by Google
Konfix 801 isan acid-curing, one-component silicone sealant for a range of general sealing and glazing applications. It's suitable for use on common non-porous building materials.
Properties
Stays permenantly elastic after curingAcetoxy curing systemVery good adhesion on common building materials and non-porous surfacesResistance to aging, cracking and discoloringResistant to many chemicals, cleaning agents and detergentsCan be applied in any seasonTypical acetic smell during curing ApplicationsGeneral sealing and glazing applications
Sealing around windows and doorsSealing in DIY applications Sanitary applicationsConnection and expansio jointsSealing electric, telephone etc. sockets and switches InstructionsThe application temperature must be between +5 °C and +40 °C.
Ensure that surfaces to be sealed are clean, dry and greasefree. In order to reduce the deformations of the joints, their depth must be much less than their width, minimum dimensions are 5x5 mm, for wider joints the depth should be preferably half of the width and it is adjusted by the use of a back up material. After the application, the sealant must be tooled with light pressure within 5 minutes to spread the material against the joint surfaces and to obtain a professional finish. Excess uncured sealant may be cleaned with solvent.Shelf Life12 months if stored at room temperature.
Shelf Life12 months if stored at room temperature.
universal silicon sealant