waterproof putty for interior and exterior wall 1. strong bond, not easy to crack 2. good freeze and weather resista waterproof putty for interior and exterior wallshort product introduction:The product is composed by Polymer resins, inorganic cementitious material, selection of filler and the special additives developed in the laboratory of the company, which called high water, anti-seismic putty.This product has the following characteristics:1. strong bond, not easy to crack2. good freeze and weather resistance3. high water resistance, good construction abilityTechnical performance:

Project	Technical standard
State in the container	Even white/gray powder
construction	Scratch barrier-free
Drying time,h	<5
Grinding,%	20~80
Bond strength,mpa	Standard conditions:≥0.6

Dosage reference:  1mm thick by grant dollars,with about 1.3kg/m2construction points:1. Base of the wall should be smooth, the decoration on the old wall should be cleaned. Using the plaster to fill the uneven wall first.2. Put the product into the water to mix into a uniform thick paste, place 3-5 minutes. Water: powder=1:2.8-3.3, the product should be used within 2h.3. Use the steel board to insert, 2-3times for each one, the thickness about0.4mm-0.5mm. you can do the second one after the first one dried4. Use the sandpaper after the drying, painting after cleaning the dust.Notes: 1. One should not grant embedded thick  2. use temperature is around 5-35°C,do not do the construction in such windy days or rainy daysPackaging and storage:This bag is 25kg. Stored in a cool dry place, unopened product can be stored for 6 months

Waterproof putty for interior and exterior walls