Perlite thermal insulation mortar is ready to use heat insulating mortar, made by inorganic gelling materials with perlite light

Perlite thermal insulating mortar

Product Advantage

Small coefficient of heat conduct with high efficiency of heat preservation

High performance of water-proof with little shrinkage

High compressive strength and great workability

Great ability of anti-scissoring

Easy to use with good adaptation

Freeze-thaw resistance

Environment protective and non-flammable

Nature                                                                                                                            

Typical Properties

Dry                     kg/m3 ≤300 %                                          

Wet                    kg/m3 ≤680 

Compressive strength                   MPa ≥0.30 

Bond strength                          MPa ≥0.1

         W/mK ≤0.065

Shrinkage                              % ≤0.3

Tensile strength                         MPa ≥0.15

Softening coefficient                      ≥0.60

Storage coefficient                      w/.k ≥0.9

                                                                                                

Recommended for

Thermal insulation of wall, roof and ceiling of all kinds of architecture, it can be used with other thermal insulating materials to form to system for heat preservation.

Guide to use

Batch

Add a bag of Perlite thermal insulation mortar1 bag mortar with 2 bag perliteto 15kg water and agitate it to make a paste for 1-2 minutes before the construction.

Construction

Paint the surface of architecture with a trowel, minimum thickness should be 10mm, after 12 hours later, paint again. The temperature should be above the 5 , keep away after construction for 2 hours, the mixed paste should be used within one hour and overdue paste is forbidden to use.

Storage

Woven fabric bag with plastic liner, please do not stored in the open air, easy to absorb moisture

Perlite thermal insulating mortar