Kafuter-Two Part Cylinder Repair Epoxy Adhesive/Car Putty/ Epoxy Glue
Main Characteristics:
This putty is two-part materials which was composited by metals, high-temp modified resin, and hardener. Room controllable time is 30-45 min, fast cure by heating, high hardness after cured, can be sanded and polished. The temperature range is 100°C to 150°C.
Applications:
Using in repairing the cracks and gaps in different kinds of cylinders, metal shells, and water tanks, etc.
Typical Properties:
(1)Appearance(by visual): A:silver viscous liquid B:earth yellow paste
(2)Shelf Life(Room sealed):two years
(3) Mix Ratio: A:B=2:1
(4) Hardness(shore-D):≥80(25°c)
(5) Shear Strength(24h/25°c):≥15mpa
How to Use:
(1) First, clean the surface by removing the oil, stain,etc.
(2) Mix glue A and B evenly by the ratio of 2:1, and then coating it on the bonded surface.
(3) After 24 hour at room temperature of 25°c, it can get 70%~80% working strength, but if heated at 80°c, it can get full cure and highest working strength.
Kafuter-Two Part Cylinder Repairing Epoxy Adhesive/Car Putty/ Epoxy AB Glue