LED potting silicone rubber maily used for Filling for LED, LCD electronic display, electronics, circuit board andsolar cell.

LED potting silicon rubber usage

LED potting silicon rubber is used for Filling for LED, LCD electronic display, electronics, circuit board potting.

LED potting silicon rubber features

LED potting silicon rubber has sticky viscosity, low shrinkage and non-corrosive; the LED potting silicon rubber can be used for a long period at the temperature of -60~200 centigrade degree with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.

LED potting silicon rubber Instructions

Mix the component A and component B evenly according to the proportion, and can be poured after deaired the bubbles. The surface of LED potting silicon rubber will cure in about 2 hours after pouring. Clean and dry the electronic element to be poured; The LED potting silicon rubber should be deaired the bubbles after pouring at the room temperature.

LED potting silicone rubber components

HY-210 LED potting silicon rubber is two-component room temperature vulcanization silicone rubber, which has low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance.

Any further information about our LED potting silicon rubber, please feel free to Contact Ms. Apple

Tel: 0086-755-89948013

Cell: 0086-15889446131

LED potting silicon rubber