Ads by Google
Pipe Wrap, Joint Coatings & Accessory Products
Xunda carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.
Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
ROW construction: Rockshield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.
Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Xunda has the tape coating for the job.
Product | Uses & General Characteristics | TotalThickness | Adhesionto Primed Steel Pipe | MaximumTemperature |
1027 | Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors. | N/A | N/A | 100°C212°F |
910 | All-purpose tape system for field application in the oil patch. | 0.25 mm10 mil | 11 N/10 mm100 oz/in | 66°C150°F |
900 | General utility tape for hand application on small diameter pipe, joints and fittings. | 0.30 mm12 mil | 11 N/10 mm100 oz/in | 66°C150°F |
930(-35) | Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use. | 0.89 mm35 mil | 25 N/10 mm225 oz/in | 66°C150°F |
932(-35) | Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified. | 0.89 mm35 mil | 28 N/10 mm250 oz/in | 66°C150°F |
932(-50) | 1.27 mm50 mil | 28 N/10 mm250 oz/in | 66°C150°F | |
934(-35) | Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping. | 0.89 mm35 mil | 28 N/10 mm250 oz/in | 66°C150°F |
934(-50) | 1.27 mm50 mil | 35 N/10 mm320 oz/in | 66°C150°F | |
939 | 100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems. | 3.17 mm125 mil | 33 N/10 mm300 oz/in | 93°C200°F |
954 | Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outerwrap) (outerwrap) machine application. | 0.38 mm15 mil | N/A (outerwrap) | 85°C185°F |
Polyethylene tape