Ads by Google
metal bonding glass uv uv adhesive glue
MOQ: 1kg
The product is uv curable glue that cures in 200 ~ 400nm wavelength ultraviolet ray. It uses in glass and metal bonding, a typical application of glass furniture industry, glass dining table, glass coffee table, lighting manufacturing and other industries.
Feature
· Flexibility and stability of the formulations, in high-temperature, low temperature, high humidity and other bad weather conditions can maintain a very high stability.
· Uses in variety of metals such as stainless steel, aluminum alloy and plating surface, special glass, low surface energy of inorganic materials are very high adhesion.
· Curing speed, curing is not long after the pale, can not afford to bubbles, do not fall off.
· Excellent antiaging properties, in highwas still hot and humid environment to maintain a high stable state.
Specifications
Test project | 3212 | 3213 | 3217 | 3218 |
appearence | clear liquid | clear liquid | clear liquid | clear liquid |
Viscosity mpa.s | 600 | 700 | 450 | 1000 |
position time(s) | 5 | 10 | 12 | 12 |
Curing Energy mj/cm² | 1500 | 1500 | 1500 | 1500 |
Tensile Strength mpa | 18/MPA | 20/MPA | 18 | 18 |
| Peel Strength (kgf/cm2) | 2.20/ | 2.20/ | 2.30 | 2.32 |
HardnessD | 70 | 75 | 25 | 30 |
. | . | |||
feature | Fast-curing glass adhesive metal, glass adhesive glass | Medium viscosity, high toughness, high stability, mainly used for glass furniture industry | Low shrinkage rate, for the electronics industry, said the glass and aluminum or steel bonding | High toughness.For the electronics industry, said the glass and aluminum or steel bonding |
The positioning time of the above that is under glass and glass bonding in 40-watt Philips intensity of 7.5 mW/cm2 uv light condition measured.
the way of using
First, Clean the surface of LCD panel
Second, Dispenser will be using glue point on the port pin or LCD perfusion
Third, use a wavelength of 365 nm ultraviolet light to carve, until the layer has fully cured. Ultraviolet light irradiation is as close as possible to accelerate the curing speed glue.
fourth, after ultraviolet radiation curing, you can resin the gel of the glass around curettage.
Notes
1. Ensure that the adhesive layer to absorb enough ultraviolet energy to achieve the best curing effect, or likely to influence adhesion layer.
2. Residual glue can not be pumped back into the original packaging, should be stored at sealed dark room temperature and without rendering children.
Storage
Storage in the dark, sealing, ventilation, cool conditions, the ideal storage temperature is 8-28 .
Duration: 1 year
Packaging
1 kg / bottle, 20 kg / barrel
uv adhesive glue 3212,3213,3217,3218