Welcome to ECVERY
UV curable resin 3350,3351,3352
UV curable resin 3350,3351,3352
Supplier Info
[China Supplier]
Contact Person : Ms. ure Fui
Tel : 86-20-85654203
Fax : 86-20-85654536
Product Detail
UV can be dried plasitic adhesive glue 3350,3351,3352 Enhanced formulation flexibility. Anti-aging well MOQ:1kg

UV can be dried plasitic adhesive glue 3350,3351,3352

MOQ: 1kg

The product is uv curable glue that cures in 200 ~ 400nm wavelength ultraviolet ray. It is mainly used in dry require effect of plastic and plastic, plastic and glass, plastic and metal materials such as bonding occasion. Aimed at selfadhesive plastic handicraft industry, and crossstick, the main bonding of plastic are: PMMA (acrylic, plexiglass), PC, ABS, PVC, PS and other thermoplastic.

.

Feature

· General products have a very broad scope application, plastic with a variety of materials have excellent adhesive bonding effect.

· Flexible formula, after curing it will not be stress cracking , low temperature, high temperature and humidity performance, Excellent.

· Curing quickly, few seconds can be positioned, one minute to reach the highest intensity, which greatly improves work efficiency.

· Completely transparent after curing, the product unchanged yellow  and  whitening for long timeCompared with the traditional instantaneous Adhesive bonding, with resistance to ring measurement, non-whitening, flexibility and good.

Specifications

Test project

3350

3351

3352

appearance

clear liquid

clear liquid

clear liquid

Viscosity

mpa.s

700-1000

4000-5000

10000-13000

position time

2

5

5

Curing Energy

mj/cm²

1500

1500

1500

the tensile strength between

acrylicwithacrylic

(MPa)

>14

>14

>14

the tensile strength between

acrylicwith glass(MPa)

>14

>14

>14

the tensile strength between

acrylic

 with metal (MPa)

>13

>13

>13

Hardness (ShaoD)

>70

>50

52

the transparency of after curing

high transparency

high transparency

high transparency

feature

Low-viscosity, dry quickly, have a greater variety of plastic adhesion

In viscosity, have a greater variety of plastic adhesion

High viscosity, for a variety of plastics have a greater adhesion

 The positioning time of the above that is under glass and glass bonding in 40-watt Philips intensity of 7.5 mW/cm2 uv light condition measured. 

the way of using

First, clean the materialsurface, dry the  surface, and wait for the fully dried before dispensing.

Second, The glue uniform point (down) in which material surface, and the other piece material placed on the glue Department to conduct light fitting, forced discharge, and squeeze the glue leveling bubble to determine the bonding sites are covered by the glue and fixed a good position.

Third, use a wavelength of 365 nm ultraviolet light to carve, until the layer has fully cured. Ultraviolet light irradiation is as close as possible to accelerate the curing speed glue.

Fouth, after ultraviolet radiation curing, you can resin the gel of the glass around curettage.

Notes

1. The ideal thickness of bonding layer is 0.01-0.05mm, if too thin or too thick, it will be affected to the adhesion properties.

2. Ensure that the adhesive layer to absorb enough ultraviolet energy in order to achieve the best curing effect, or possibly to influence adhesion layer.

3. Not back and forth movement of the glass, otherwise easily led to layer whitish and bonding strength decreased.

4. Residual glue can not be pumped back into the original packaging, should be stored at sealed dark room temperature and without rendering children.

Storage

Storage in the dark, sealing, ventilation, cool conditions, the ideal storage temperature is 8-28 .

Duration: 1 year

Packaging

250g/bottle,1 kg / bottle, 20 kg / barrel

UV curable resin 3350,3351,3352

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.