Welcome to ECVERY
KNG-G118 Acetic Silicon Sealant
KNG-G118 Acetic Silicon Sealant
Supplier Info
[China Supplier]
Contact Person : Mr. Zheng Neo
Tel : 86-757-22909059
Fax : 86-757-22909259
Product Detail
Acetic Silicon/Silicone Acetic/Acetic Sealant: 1.RTV,good extrusion. 2.Excellent adhesion for glass and most building material

ACETIC SILICON/SILICONE ACETIC/ACETIC SEALANT

CHARACTERISTICS:

•One component, acetoxy type, room temperature curing silicone sealant silicone, good extrusion and easy to use.

•Excellent resistance in aging climate.

•Excellent performance between the temperature of -50°C to +150°C.

•Excellent adhesion for glass and most building materials.

BASIC USES:  

•The installation of various types of windows&doors, gasket repair.

•All kinds of decorative filling and sealing.

•Many other building and industrial purposes.

TECHNICAL DATA

 

Property

 

National Standard

GB/T14683-2003

Measured Value

 

Test Mothod

Flow/Sag/Slump(mm)

≤3

0

GB/T13477

Extrusion(mL/min)

≥80

660

Tack-Free Time(min)

≤180

10

Hardness(HsA)

/

18

GB/T531

Thermogravimetry%

≤10

7.0

GB/T13477

Elastic Recovery%

≥80

92

Tensile Strength MPa Standard Condition

≥0.4

0.41

Tensile Adhesion

No breakage

No breakage

Elongation at break%

/

220

Shelf life

9 months stored below 27oC in cool, dry places after the date of  production.

APPLICABLE STANDARD:

National Standard: GB/T14683-2003. 

INSTRUCTION:

 See ≤KNG SEALANT APPLYING TECHNOLOGY GUIDE≥

  

Colors:

 Black,clear,white or other colors on request. 

Storage and shelf life: 9 months shelf life if stored below 27oC in cool, dry places after the date of productiion.

  

Caution: 1. When skin or eye contact occurs, immediately flush with water for 15 minutes, get medical  attention, if irritation persists. Fully cured sealant is not hazardous. 2. Used in the well-ventilated environment. 3. Keep out of reach of children.

Limitations: 1. Can't be used to marble, granite and other alkalescence materials;.2. Not recommended for oil contained or blended surfaces.

3. Not suitable for confined joint(the sealant need atmospheric moisture for cure).4. Not suitable to use when the temperature of the materials surface is lower than 4oC or higher than 40oC .

Inner Packing:300ml plast cartridge, 25PCS/CTN; 595ml foil sausage, 20PCS/CTN.

Outer Packing:Dimensions for 25pcs of 300ml: 25.3×25.3×24.5 (cm)

KNG-G118 Acetic Silicon Sealant

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.