single component Savergy insulating glass special sealant has good cohesive strength between Savergy warm edge spacer and insulating glass.
Usage guide:Surfaces must be clean and dry.Operating temperature:5°C~45°C.Please do cohesive test for base material before application.Do not use near fire or flame. keep out of reach of children.Store in its original unopened package in a dry and shady place.
Number | Item | Parameter | ||
1 | Droop(mm) | Vertical place,mm | <1 | |
Horizontal place, mm | No deformation | |||
2 | Extrudability,s | 5 | ||
3 | Hardness,shore A | 30~60 | ||
4 | Curing time, d | 7-10 | ||
5 | Surface drying time,h | 2 | ||
6 | Stretching cohesive strength/MPa | 23 | >0.8 | |
90 | >0.6 | |||
-30 | >0.8 | |||
7 | Temperature resistance/°C | -60-180 | ||
8 | Anti ultraviolet rays and ozone | Water-ultraviolet continuous exposure 2500h,No change | ||
9 | Good compatibility with Savergy warm edge spacer |
Savergy insulating glass special sealant