YULONG WATER BASED ACRYLIC CONSTRUCTION SEALANT1. acrylic paintable sealant2. multipurpose,windows and doors sealing
DESCRIPTION:
It is a one part, water based acrylic sealant that cures to a flexible and tough rubber with good adhesion to porous surface without primer. Suitable for sealing and filling gaps or joints where low demands of elongation are required.
FEATURES:
1. Waterproof, Paint able.
2. Flexible
3. Excellent Adhesion to most construction materials
WHERE TO USE
1. It is mainly for sealing the gaps or joints interior and exterior, such as doors and window frames, walls, window sills, prefab elements, stairs, skirting, corrugated roof sheets, chimneys, conduit-pipes and roof gutters.
2. It is also can be used on most construction materials, such as brick, concrete, plasterwork, asbestos cement, wood, glass, ceramic tiles, metals, aluminum, zinc and so on.
3. It is not suitable for permanently flexible sealing, for cars or spaces where wet conditions exist, e.g. aquaria, foundations and swimming pools.
Technical Data(for reference)
No | Item | The Standard | Test result |
1 | Appearance | Have no grain, no agglomerations | good |
2 | Specific gravity, g/cm3 | 1.65 | |
3 | Extrusion ability, ml/min | ≥100 | 150 |
4 | Tack free time, h | ≤1 | 0.4 |
5 | Elastic recovery rate,% | 40 | 35 |
6 | Fluidity Resistance, mm | ≤3 | 0 |
7 | Ultimate elongation at break,% | ≥100 | 240 |
8 | Low temperature flexibility,oC | -5 | -5 |
9 | Stability of low temperature storage | No caky and islating | No caky and islating |
10 | Water resistance at the beginning | No feculent | No feculent |
11 | Ultimate tensile strength at break,Mpa | 0.1 | 0.1 |
Carried by Industry standard JC/T484-2006.
Packaging: 300ml/cartridges, 24 cartridges/carton or per buyers' demand
Storage method
Acrylic Sealant is sensitive to frost and must be kept in tightly closed packing in a frost-proof place. The shelf life is about 2 years when stored in a cool, dry place.
Opened tubes and cartridges should be stored as follows:
Tube: twist the nozzle applicator off the tube and screw the cap onto it.
Cartridge: twist off the plastic applicator-nozzle, cover the nozzle end of the cartridge with a plastic film and screw the applicator onto the cartridge again.
CAUTIONS
1. Do not apply at temperature below 0 ºC.
2. Be not fit for continuous immersion in water.
3. Keep out of reach of children.
YULONG WATER BASED ACRYLIC CONSTRUCTION SEALANT