Welcome to ECVERY
3M 3748 Hot-melt Adhesive&Good thermal shock resistance
3M 3748 Hot-melt Adhesive&Good thermal shock resistance
Supplier Info
[China Supplier]
Contact Person : Mr. Xu Zixing
Tel : 86-755-82592515
Fax : 86-755-82599099
Product Detail
1.Good thermal shock resistance 2.Non-corrosive to copper for many electronic applications 3.Off-white Bonds polyolefins


1.3M3 748 is particularly suitable for the bonding and rigidisation of components on printed circuitboards where thermal and mechanical shock resistance is required.2.3M3 748 is also suitable for bonding low energy plastics such as polypropylene andpolyethylene.3.Typical uses for 3748 include rigidising components, potting, wire fastening, sealingconnectors, vibration protection, stabilising loose components, coil termination, coilattachment, holding components prior to soldering, insulation of bare conductors, polyolefinbox bonding and sealing polyolefin coated carbon boxes.

Health and Safety  InformationHot adhesive vapours may irritate eyes and respiratory system. Do not touch hot extrudedadhesive or applicator tip. Avoid prolonged breathing of vapours.Avoid eye exposure to heated product vapours. In case of skin contact with hot adhesive,immediately flush with cold water and cover with a clean dressing. Do not attempt toremove adhesive, have burn treated by a doctor.

3M 3748 Hot-melt Adhesive&Good thermal shock resistance

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.