low insertion loss, high stop band attenuation, and steepened filter curve through additional stop poles

Brand pass filter Technical data:

Type NO. LP-FT15/15C 

Frequency Range 2010-2025 MHz

Bandwidth 15 MHz

Ripple ≤0.3 dB

Group Delay ≤55ns

Impedance 50Ω

Insertion loss @2007MHz≤1.0 dB @2028MHz≤1.0

VSWR ≤1.22

Rejection:Room & High/Low Temperature ≥60dB@824~894MHz ≥65@1725~1750MHz ≥55dB@9kHz~1920MHz ≥40dB@1920MHz~1980MHz ≥33dB@1980MHz~1990MHz ≥25dB@2045MHz~2075MHz ≥40dB@ 2075 MHz~12.75GHz ≥55

Temperature Range -40°C~+80°C -40°C~+75°C

In/out Port Structure SMA-F

Dimensions(mm) 180mm×70mm×32mm (Including screw)

FILTERS The band-pass filter is used as a receiving or transmitting filter for one or several receiving or transmitting channels. It can be used: -to improve the input selectivity of receivers, -to increase the isolation of transmitters whose respective antennas are mounted close together, and -to suppress noise sidebands and inter-modulation products. Design and construction: The Band-pass Filter consists of 5 high Q cavity resonators.

Band Pass Fliter