TD-A50 Plug-in  Air Purifier  Ozone Generator

Specifications

Features

1 Timing of 30 minutes sterilization to avoid you contact ozone directly.

2 Humanized design, double-mold of automatic mode/manual mode.

3 Without chemicals or any supplies, energy conservation and environmental protection.

4 Suit for various areas and all countries.

Functions

1. Adopts technology of ceramic tube to generate ozone to sterilize the air by its oxidation and be deoxidized into oxygen without secondary pollution.

2. Ozone, as a kind of oxidant to prevent diseases and to cure diseases auxiliary.

Details

 Maintenance

Kindly Reminder: In order to keep the product operates properly; clean the unit at least once in 3 months.

1. Turn the unit off and disconnect the power. Use a vacuum of dust absorption to remove debris from the air intake on the rear of the unit.

2. Dip the cotton swab in alcohol, gently rotate the cotton swab to clean intake of the unit until wiping off all the dust, and then use a dry cotton swab to repeat the above operation, it can not be used again before the outlet completely dry.

Usage

1. Preparation: Very the unit is off or not before plug in.

Start: Turn on the right switch, C-Type power indicator lights, the unit starts to generate the ozone to purify the air.

2. Close: Turn off the right switch, C-Type power indicator is off when the unit stops operation, in the meanwhile, the unit is in intelligent standby status.

3. Timing: Automatically stops purification after 30 minutes operation, if you click the round button in the center of the unit when the side switch is on the OFF/AUTO (Invalid when the unit is operating) .

Packing

Plug in Ozone Generator