Specifications:
1. Competitive price &high quality
2. New style &store available 3.Perfect anti-theft &charge
4. Short Delivery Time &Customized MOQ
Mobile Phone Security display holder with Alarming and Charging
It is the most innovative security alarm display system. 1) Prevent your displaying electronics from shoplifting 2) It's convenient for the customers to see mobile phone,camera,laptop,MP4 in the exclusive shops, etc. 3) With the connection of the electronics to the display shelf, security display holder can realized immediately while removed.
4) Charging and anti-theft alarm for mobile phone share one line
Perfect T Alarm FunctionThe security alarm display holder will alarm when it happens as below: 1) Circuit break resistance 2) Short circuit resistance 3) Other circuit-replacing resistance 4) Prying and cutting resistance 5) Remove the sensor 6) Cut the spring wire 7) Put out the connector 8) Put out power connector- alarm (above 5 minutes or more long, according to customers' requirement)
9) When remove or pry the stand on the bottom, the anti-theft function also can be available.
Product Installation
1) Fix the holder on the exhibition counter with the special screws. 2) Tear off the plastic film, and then paste the holder.
Alarm solution The indicator light will turn red immediately when alarm. Use the remote controller to send signal to the host within 10mm, press ''lock'', and the host indicator light turn green .
Operational steps:
1. Connect the power charge for host when it is low power
(the LED will turn green when charging and extinguish when it is finished)
2. Turn on bottom button and the LED flash blue light (the holder works)
3. Remote controller aim at receiver within 15mm, press the button is ok.(the D…D…voice will be heard when press the button)
4. Tear off the plastic film that close to the 3M sticker adhesive
5. Put the 3M sticker adhesive on the smooth surface(press tightly more than 10 seconds)
6. Tear off the film from the small contactor.
7. Put the small contactor on the cell phone(press tightly more than 10 seconds)
The holder will issue D…D… voice when above operation is finished, and the LED flash blue light every five seconds.
Aluminum display holder +security solution For Ipad display security