Product Description

Working principle ACM8602 telephone online alarm system is composing of main unit, PIR detector, wireless door sensor and remote controllers. Once the sensor detects intruder, it will transfer the wireless code to the main unit and the main unit starts high dB field alarm when it receives the alarm signal. At the same time, it shows which zone alarms in the main unit which can make sure where the intruder is. And the main unit will dial the phone number which preset continuously and play the record voice. The user can do a series of remote controls when he answers the phone. ACM8602 adopts the international advanced microcomputer chip control system. It detects farther, owns stable feature and many alarm systems can be installed adjacently without interference. DC can be used when power off, this make more convenient and economical for the user. Using range: Home, Building, Courtyard, Factory, Garage, Office, Financial place, Store etc. Main feature 8 wireless zones, 6 wired zones and 1 output for alarm centre LED displays, keyboard input, operate conveniently. Can auto set 1, 2 grade to arm / disarm Connect to Ademco contact ID Advanced learning code function Super password, project password, user password three grades for the using rights management Auto-dial 6 groups of phones which preset. Can get the first line when alarms System profile 1, Composing Main unit PIR detector Door sensor Remote controllers Adapter 2, Install main unit (1) Put the city web line into the [LINE]; (2) Put one end of the attached double-edged telephone line into the [PHONE], the other input the user telephone; (3) Put the DC output plug of the outside adapter into the [DC]; (4) Let the outside power plug into the AC base; (5) Drag out the antenna; (6) Place the main unit suitably, or hung on the wall. (7) 8 pieces of 1# battery and AA chargeable battery (note: 1.2 chargeable batteries must need) can be used when power off. (8) Switch the power to [ON]. 3, Install detectors (1) Install PIR detector Open the detector, put the battery in, and switch on. Put 2 meters high above the ground, the lens in front of the monitor place, when some one moving, the red indicator on means has detected the target and send the signal. Notice: The detection will be the best, if the intruder walks across the detector at a 90 degree angle. The detector should be put far away from the HEATER, AIR CONDITIONER, and MCROWAVE OVEN etc. Which can generate heat. When open the detector, there is 2 minutes of unstable time, arm as this time passed. (2) Install door sensor Put the transmitter of wireless door sensor on the frame of the window, and the magnetic on the window, open the door making the distance 5mm or more, the indicator on and the sensor works. While the light become weaken or the sensor detects shorter, it shows no enough battery power for it, you need to change in time.

Wireless Telephon Network Alarm System