Welcome to ECVERY
H2S Portable Gas Detector
H2S Portable Gas Detector
Supplier Info
[China Supplier]
Contact Person : Ms. Zhang xiaohui
Tel : 86-373-5598265,13949609696
Fax : 86-0373-5592070
Product Detail
- Stable and Intellectual - Easy data setting and operation - Zero, sensitivity and alarming point can be adjusted

Brief introduction:

BX170portable H2S gas detector with 4-digit LED indication, adopting catalytic gas sensor and MCU, is intrinsically safe gas detector for mining industry. It's normally used under the coal mine industry where CH4 and coal dust etc. mixture exists. Compared with the similar products, this model has the following advantages.

Main features:

- Stable and Intellectual - Easy data setting and operation- Zero, sensitivity and alarming point can be adjusted on the keyboard- Excellent sensitivity and repeatability- Smart housing design- Water-proof, dust-proof and explosion-proof housing- This model has passed the test and inspection of Chinese authoritative department according to the following standard Q/ZCM014-2008.

Technical Information:

- Adopting low-consumption MCU- Ultrahigh LED indication- Adjustable alarming level- Easy calibration- High concentration protection function- Gas sensor fault self-test- Low voltage alert and turn off automatically- Replaceable gas sensor module- Self adjustment function- Audio and video alarming- Self test function after power on- Password management function to avoid wrong operation- Intrinsically safe

Specification:

Detection range: 0-100 X 10-6H2S Alarming level: (1-30) X 10-6H2S  Continuous adjustable Presetting level: 10 X 10-6 H2S Error rate: (0-49) X 10-6 H2S  not more than +/-3 X 10-6 H2S(50-100) X 10-6 H2S not more than +/-10% real levelResponse time: T<=50sSensor life: 2 yearsProtection degree: IP66Explosion-proof degree: ExiaIICT3Weight: About 130gDimension: 100mm X 60mm X 32mmIndication: LED displays the real-time date and detector statusAudio and video alarming, fault alert and low voltage alertIntrinsically safe battery: Model: SPIC 084348Capacity: 1500mAh 1pcMax. voltage: 4.2V     Rated voltage: 3.7VMax. short circuit current I0: 2.5A       Rated current: <=30mABattery is encapsulated by epoxide resin with thickness not less than 1mm. Inside the encapsulation, there is protection management on the overload voltage, overload current and low voltage. Charging time: 4h-8h Working condition: Tem.: 0oC-40oC  Hum.: <=98%RH (25oC) Air pressure: 86-106kPa

H2S Portable Gas Detector

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.