Welcome to ECVERY
Smoke alarm
Smoke alarm
Supplier Info
[China Supplier]
Contact Person : Mr. Leung Buick
Tel : 86-0760-22245920
Fax : 86-0760-22131843
Product Detail
1.SMS to host after detect fire singal, 2.work with alarm accessory 3.Bulit-in 3.7v lithium battery 4.Photoelectric detect

• smoke alarm 1.3V Lithium Battery Smoke Alarm 2.High alarm 75dB(3m) 3.Test button with LED 4.Low battery alarm

Smoke Alarm LT-SA01 is used to detect smoke and fire.It is under BSI approval, and can be calibrated into either UL, VDS, NF Standards. This smoke detector features UL-approved Photoelectric sensing components with precise smoke detection. and long life (18 months) 9V battery operation (9V UltralifeLithium battery model for 10-year life is available too).3V battery operated smoke detector, Meets CE, RoHSEN 14604 certified  Smoke detector Specifications/Special Features: • Features: 

° Works on principle that infrared scatters on smoke surface

° Probes smoke which is generated by incomplete combustion at initial stage of fire

° Smoke detector consists of photoelectric system, signal processing identification and alarm circuit

° Infrared scatters on surface of smoke when smoke enters darkroom of detector

° Photoelectric diode receives scattered light and generates photoelectric signal current

° Photoelectric signal generates alarm signal after being processed by identification circuit, accordingly purpose of alarming is achieved

Specification:

MaterialABS Plastic
Power supply3V Lithium Battery
Operating current10μA
Alarm current10 -30 mA
Operating temperature-10°C ~ +50°C
Humidity0 to 95%(40±2°C),no condensing or icing
Alarm decibelLouder than 75dB at 10feet(3 meters)
Test buttonTo verify the proper functioning of smoke alarm
Low voltage warningSmoke alarm beeps every 40 seconds for 30 days (minimum) to indicate a need of battery replacement
Smoke sensitivity0.086 dB/m to 0.140 dB/m

Install and use:

    Chooses the suitable place first. And then fix the foundation with screws. Turn the sensor on the foundation according to the color of lines. One sensor is 25~40  M2 space, 0.5~2.5m above important equipment.

    LAN wire mode:

    Red line -----12V                                  White line ------ Off

    Black line ----- Ground                        Green line -------- On

    Blue line ------ Public

Work & test mode:

   The alarm is working when it's on. The led twinkles once every minute The alarm makes clear and pulse signal with sound and light while there is smoke. And output several point signal or wireless signal for gathering till the smoke is gone.

   While press the rest button and hold on for over 3 seconds, the alarm will make a clear and loud pulse signal. And the led twinkles frequently, the alarm give off sound like "Di ... Di ... "

Smoke alarm

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.