Ads by Google
INTRODUCTION:
The wind/solar hybrid controller is specially designed for high-end small-scale wind/solar hybrid system and especially suitable for wind/solar hybrid street light system and wind/solar hybrid monitoring system.The controller can control wind turbine and solar panel at the same time and transform the wind and solar energy into electricity for DC load use, with excess energy stored into batteries. Varieties of appearance and function design, which is flexible to meet the requirements of different customers.
TECHNICAL PARAMETERS:
Product Model | WWS06-24-N00 |
Rated Battery Voltage | 24V |
Rated Wind Turbine Input Power | 600W |
Maximum Wind Turbine Input Power | 900W |
Rated Solar Input Power | 300W |
Dumpload Start Voltage | 27V |
Charge Shutoff Voltage | 29V |
Wind Turbine Brake Current | 25A |
Battery Over Discharge Protection Voltage | 21.6V |
Battery Over Discharge Recovery Voltage | 24V |
Output Over Voltage Protection Value | 32V |
Light Control On Voltage | 2V |
Light Control Off Voltage | 3V |
Rated Output Current of Load 1 | 10A |
Rated Output Current of Load 2 | 10A |
Load 1 Output Control Mode | Light Control On and Light Control Off |
Load 2 Output Control Mode | Light Control On and Time Control 5 Hours Off |
Dumpload Control Mode | PWM |
Display Mode | LCD |
Quiescent Current | ≤20mA |
Ambient Temperature & Humidity Range | -20~+55°C/35~85%RH(Without Condensation) |
Display Content | Battery Voltage, Wind Turbine Voltage, PV Voltage, Wind Turbine Current, PV Current, Wind Turbine Power, PV Power, Over Voltage, Under Voltage, Over Load, Short Circuit, Night etc status |
Protection Function | Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection, Battery over discharge protection, Battery reverse connection protection, Over load protection, Short circuit protection, Lightning protection Wind turbine current limiting, Wind turbine automatic brake and manual brake. |
Communication Mode (Optional) | RS232,RS485,RJ45,GPRS (Optional) |
Temperature Compensation Function (Optional) | -4mV/°C/2V ,–35°C--+80°C,Precison:±1°C |
By-pass function (Optional) | Auto Switch |
Dimension (L x W x H) | 142×150×82mm |
Weight | 1.9kg |
Data for Micro Current Charge Function | |
Wind Turbine Start Charge Voltage | 12V |
Dimension (L x W x H) | 142×150×82mm |
Weight | 2kg |
Data for Low Voltage Charge Function | |
Wind Turbine Start Charge Voltage | 4V |
Input Admittance Value | 10/30S |
Dimension (L x W x H) | 220×150×82mm |
Weight | 2.8kg |
In order to serve our customers better. Our company can adjust parameters configuration according to customer’s requirement. | |
Installation procedure display:
Packing picture:
Our factory:
Certificate:
600W2012 New Wind And Solar Hybrid Street Light Controller ,24V Battery