Aerosol spray dry lubrication white color release and lubricate spray

Boron Nitride occupies a unique place among materials because of its unusual physical, thermal and dielectric properties. It has a hexagonal crystalline structure resembling that of graphite, and is available in solid, powder, coating or aerosol form.

Jonye Boron Nitride aerosol spray consists of boron nitride powder dispersed in an organic solvent  carrier and carefully compounded with a small amount of binder to facilitate adherence. A propellant that is ozone-friendly and non-carcinogenic drives the spray. However, this propellant is flammable and should be kept from open flame, sparks, heat or other ignition sources.

Properties

Jonye Boron Nitride aerosol is a very lubricious drying spray which deposits a thin film (15micron) boron nitride powder on sprayed surfaces. This powder film is very lubricious, produces an excellent anti- stick surface and will also act as an oxidation up to 850C. It is chemically inert to most organic and corrosive agents, and is not wet by molten glasses or slags.

Applications

Boron Nitride aerosol may be used as a coating for:

 High temperature release (crucibles, molds, transition plates) High temperature lubrication  Corrosion resistance to molten metals, molten glasses and slags  Anti-oxidation barriers  Anti-stick barriers during hot pressing operations 

Method of Application

Surfaces to be sprayed should be clean and free of dust and organics. Roughing the surface with a fine grit sandpaper can help facilitate a mechanical bond. Shake the can well before using. Hold the can approximately 30-50cm away from the surface to be coated and spray with a uniform sweeping motion. Do not spray into open flame. The approximate coverage of one 550ml. can of aerosol is 3-4. sq.m.

Availability

Jonye Boron Nitride aerosol is available in 550ml cans or by the case (24 cans per case).

China Producer JonyeTech Boron Nitride Aerosol Spray