Ads by Google
LP-5 power amplifier specifications:
| LP-5 power amplifier SPECIFICATIONS | |
| Power per channel 8 ohms (1) | 750W |
| Power per channel 4 ohms (1) | 1200W |
| Power bridged mono 8 ohms | 1900W |
| Power bridged mono 4 ohms | 2100W |
| Signal to noise ratio (20 Hz - 20 kHz) | 103dB |
| Frequency response | 15Hz~25KHz |
| Phase response | 15hz to 25kHz |
| Intermodulation Distortion | 0.05% |
| Slew rate | 40V/us |
| Crosstalk | 70dB |
| Input sensitivity 8 ohms | 0.77/1.0/1.44V |
| Input sensitivity 4 ohms | 0.77/1.0/1.44V |
| Voltage gain | 75:1 +/-3% |
| Power supply (3) | Toroidal transformer |
| Damping factor @1kHz / 8 ohms | 800 |
| Damping factor @100Hz / 4 ohms | 600 |
| Input impedance | 10kΩ un baianced -20kΩ baianced |
| Cooling | High/Low Automatism Cortrol |
| Input connectors, each channel | Balanced XLR and 1/4"(6.3mm)TRS |
| Output connectors, each channel | "ouch-proof"binding posts & SPEAKON |
| Grounding floating switch | Ground/Lift |
| Working mode (stereo/parallel/bridge) | stereo/parallel/bridge |
| Amplifier protections | DC Safeguard/out Overloading/Chancrois |
| Sgartup/Boot-Strap Short Test | |
| Active limiter (6) | commpressor |
| Active limiter ON/OFF switch | on/off |
| Rack sixe | 2U |
high power amplifier