Hex Bolt Sleeve Anchor

Material:carbon steel or stainless steel

Assemble:serrated hex flange nut,coned-shaped rod bolt,sleeve.                    .

Shell type:many hole types for your choose .

Coating: Cr6 zinc/Cr3 zinc,3-5μm,WZP of YZP.

Size:

a)Metric:anchor diameter:6.5mm,8mm,10mm,12mm,16mm,20mm,working length from 25mm to 300mm

b)Inch:Outer diameter:1/4,5/16,3/8,1/2,5/8,3/4,working length from1-3/8 to 6-1/4

Applications:

Light to medium-duty into concrete,brick and block

Technical Informations:

The Sleeve anchor is constructed of plated carbon steel parts.Each part is zinc plated and assembled into a complete ready-to-use anchor.The anchor consists of threaded stud with an outwardly flared coned-shaped end.A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone.A washer and flange nut are then assembled on the stud to complete the anchor.The anchor works on a true expansion principle:Tightening of the flange nut pulls the cone-shaped stud end into the expander sleeve,wedging in outward and locking the anchor into the base material

 For further information,pls feel free to contact me

Best regards

note:the part of here only shows our manufacturing capabilities,if customers have any parts of aimilar manufacturing methods ,please send us the drawings and specifications for our quoatations

Hex Bolt Sleeve Anchor