3.Electrical Characteristics
3.1 Dielectric Antenna
Form 1
No. | Item | Specifications | Post Environmental Tolerance |
1 | Center Frequency(MHz) | 1575.42 MHz | ±3 MHz |
2 | Band Width(MHz) | ±5 MHz | ±1 MHz |
3 | V.S.W.R(in BW) | 1.5:1 | — |
4 | Gain(Zenith) | 3 dB | ±0.5 dB |
5 | Polarization | RHCP | — |
6 | Impedance | 50 Ω | — |
3.2 LNA/Filter
Form 2
No. | Item | Specifications | Post Environmental Tolerance |
1 | LNA Gain | 28±2 dB | ±2.5 dB |
2 | Noise Figure | 1.5 dB | — |
3 | Filter Out Band Attenuation | 12dB Min f0+50MHz 16dB Min f0-50MHz | ±1.0 dB |
4 | DC Voltage | 2.2~5 V | |
5 | DC Current | 5~15 mA |
3.3 Mechanical
Form 3
No. | Item | Specification |
1 | Cable | RG174 3m/5m or others |
2 | Connector | MMCX |
3 | Plastic Housing | Black |
4 | Mounting | Screw |
5 Environmental Specifications
Post Environmental Tolerance (Refer to the form 1~2 )
Condition:Temperature range 25±3°C
Relative Humidity range 55~75%RH
Operating Temperature range -40°C~+85°C
Storage Temperature range -40°C~+100°C
5.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
5.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
5.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
5.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.
5.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.
5.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
6 Weatherproof
Put the antennas in 1m deep water for 12h, and find 100% waterproof.
...
(Manufactory) GPS Auto/Car Active Antenna
Verified Information This information is Verified by Bureau Veritas and validity period is 2012/09/12 --- 2013/09/12 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity:Interface Cable, GPS Active Internal Antenna, GSM Antenna, GPS Antenna, Combination Antenna, Wifi Antenna | 200,000Pcs/Month | 2,281,073 Pcs |
North America | confidential | 6.59 |
South America | confidential | 1.06 |
Eastern Europe | confidential | 22.94 |
Southeast Asia | confidential | 1.98 |
Africa | confidential | 1.41 |
Oceania | confidential | 0.77 |
Mid East | confidential | 0.98 |
Eastern Asia | confidential | 0.23 |
Western Europe | confidential | 29.96 |
Northern Europe | confidential | 0.88 |
Southern Europe | confidential | 1.05 |
South Asia | confidential | 0.14 |
Domestic Market | confidential | 32.01 |
Assembly Line | No Information | 8 | 1.0 | Acceptable |
Coiling Machine | Touch Win | 3 | 1.0 | Acceptable |
Automatic Wire Stripping Machine | ZDBX-36R | 9 | 1.0 | Acceptable |
Ultrasonic Welding Machine | Jinling | 2 | 1.0 | Acceptable |
Punching Machine | 2T | 4 | 1.0 | Acceptable |
Electric Iron | No Information | 20 | 2.0 | Acceptable |
Bench Drilling Machine | Z512B | 3 | 1.0 | Acceptable |
Solder Paste Printing Machine | HX-3040 | 1 | 1.0 | Acceptable |
Surface Mounting Machine | SUMSUNG | 1 | 1.0 | Acceptable |
Reflow Soldering Machine | RF-820-LF | 1 | 1.0 | Acceptable |
Network Analysis Gauge | E5071C | 7 | 2.0 | Acceptable |
Noise Figure Meter | 8970b | 1 | 1.0 | Acceptable |
Microwave Dark Room | No Information | 1 | 1.0 | Acceptable |
RoHS Test Device | EDX1800B | 1 | 1.0 | Acceptable |
High and Low Temperature Moisture Tester | GDS-100 | 1 | 1.0 | Acceptable |
Vibrate Tester | DZD-450LFS | 1 | 1.0 | Acceptable |
Salt Spray Test Cabinet | YWX/Q-150 | 1 | 1.0 | Acceptable |
Global Position Simulator | GPS-101 | 1 | 3.0 | Acceptable |
DC Power Supply For Communication Test | PS-1501DA | 11 | 3.0 | Acceptable |
Tensometer | NK-100 | 2 | 3.0 | Acceptable |
ISO9001:2008 | AFNOR/AFAQ | 2010/38195 | Manufacturing and Sale of GPS and GSM Antennas | 2010/09/13 --- 2013/09/12 | |
ISO/TS16949:2009 | AFNOR/IATF | 2010/38196 | Manufacturing and Sale of GPS and GSM Antennas for Automobiles | 2010/09/13 --- 2013/09/12 | |
FCC | ECMG | JIA-0811-8095-FCC | Antenna & JCA*/JCB* | 2008/11/18 --- 2049/12/31 | |
CE | TUV | AE 50086108 0001 | Antennenanlage & GAACZ-A, GAAGG-B | 2006/06/23 --- 2049/12/31 |
Test Report (REACH) | Shenzhen BCTC Technology Co., Ltd. | Antenna & JCB Series, JCA Series, JCG Series, JCW Series, JCD Series, JCM Series, JCN Series, JCE Series, JCZ Series | 2012/05/05 |