Ads by Google
RG59+Power Wire:
Specification:
RG59
1) Conductor : 0.813CU
2) Insulation : 3.66 Poam PE
3)Braiding Shield : 90% coverage copper or CCA
4)Jacket :6.1 PVC
2C(Power cable)
1) Conductor : 18AWG bare copper
2)Insulation: PVC
Type | RG-59+Power Wire |
Specification | TD-5995V/2*18AWG |
Application | Monitor |
Conductor | 0.813 CU |
Dielectric | 3.66 FPE |
1st shield tape | |
1st shield braid | 128*0.12 BC |
coverage | 90% |
2nd shield tape | |
2nd shield braid | |
coverage | |
Jacket | 6.10 PVC |
Messenger | |
Screening factor at 100-3000MHZ | 75dB |
DCR Conductor ohm(Kft/Km) | 10.50/34.40 |
DCR Shield Ohm(Kft/Km) | 2.70/8.90 |
Return Loss(MHz) | |
5-470 | >20.00dB |
470-1000 | >18.00dB |
1000-2200 | |
Impendance | 75 Ohm±3 |
Capacitance | 52pF±3 /m |
Velocity Ratio | 82% |
Min. Bending Radius | |
Installation | 22mm |
Repeated | 67mm |
Pulling Tension MAX | 430N |
Temperature | |
Opearation | -20? to 75 degree |
Installation | 0 to 60 degree |
Sparker | VAC 4000 |
Dielectric strength | VAC 2500 |
RG59+Power Wire