1.Small design,easy installation 2.New product led projector car lights 3.Shockproof,Waterproof,Dustproof

2012 Hot Sale Ghost Shadow Light, Car projector light, Welcome Light

             Reliable quality+ Best price+Perfect after-sale service

Power:	3.6W	color:	black
Lumen:	125LM	Working Volt :	DC 12V
size:	D16*L35MM	Life :	more than 50,000 hours
Available cars :	different car model is available	working temperature	-20°C~80°C

  

product description:1,The production using new internal structure design make the product more small overall dimensions, disguised better, more convenient in installation construction.

2.Professional design of light imaging technology makes projection screen is very clear and cast shadow more even, image is clear, the aperture no shadow, no broken surface, no distortion; measurement projection 5 meters shadow no deformation without astigmatism.

3.The light source adopts imported 3 w luminescence Angle for 60 degrees highlighted LED, using constant current drive circuit, ensure product use stability.

4Waterproof and dustproof design:Don't worry about water effects and destroyed when you wash the car;

5.Counter-attack joint protection,temperature protection, timing turn off, multiple line protection;

packing:

  1pcs/color box,20pcs/carton,carton size;54*36.5*19CM; N.W./G.W.:3.8/4.43KGS;

How to Install into the car ?

1)This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground ;

 2)Pull down the inside door board first. Mark the suitable location for drilling a hole.

3)Drill the hole on the door board with  borer .

4) Inset the product from the bottom of car door ,then arrange the power cord.

5) Install the nut through the power cord upon the hole inside; Tighten the nut;

6)Connect the power cord according to the installation guide;

7)Adjust the lamp projection to the suitable place with wrench tool.

8)Reinstall the inside door board,then check the final effect.

car door welcome light