Parameter of garage door opener
Parameters | S28/600 | ||
power | AC220V±20% 50Hz | ||
Maximum input power | 200W | ||
motor | DC 24V | ||
lifting force | 600N | ||
Travel limit | Electronic memory, | ||
soft start/stop | yes | ||
auto close | 0~9min menu setup | ||
automatic bulb off | 3min | ||
Lifting height | 2.1m,2.4m | ||
Drive type | belt | ||
door travel speed | 160mm/s | ||
noise | 65dB | ||
Remote control | Rolling code 433.92MHz | ||
Remote distance | ≥30m | ||
ambient temperature | -25°C ~ +50 °C |
S26 will lock the door when power is off, Soft start and soft stop,
remote controls: 433.92MHz , each opener can learn 100 pieces of remotes
Available in belt and chain drive. and each opener can be packed into one package.
The opener can close the door automatically after a while whenthe door is at the opening position. And when met some objects, will reverse back automatically.
Fault self-checking: S26 willself-check when it is under operating, if there is fault the code will beshowed on the LED. It is convenient for adjusting and maintaining
Can be added with battery back up, wireless keypad, wall switch, outside receivers etc.
Quiet Garage door openers