Aircraft warning light.LED airport lamp.medium intensity.red flashing obstruction beacon.compliant with ICAO,FAA,CAAC.
LM001 Medium intensity obstruction light (Type B) for marking Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a flashing red safety light. Compliant to ICAO standard. The enclosure of LM001 is made of die casting aluminum with powder coated finish, light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Steel wire is used to connect to base against falling in operation.
Specifications
DescriptionParameter
Supply voltage | AC110V ~ AC240V / DC24V / DC48V |
Frequency | 50Hz ~ 60Hz |
Power consumption | 90W |
Intensity | 2000cd ±15% |
Horizontal degree | 360° |
Vertical degree | 3°mnm |
LED lifetime | ≥80,000 hrs |
Ambient temperature | -40°C ~ +60°C |
IP Protection | IP65 |
Weight | 14Kg |
Visual distance | 16.5Km (AT=0.85) |
Functions & FeaturesModular design and meets optics standard, compact size and high efficiencyBased on LED technologyExtremely reliable - major maintenance cost savingResistant to shock and vibrationsCorrosion resistant lamp& housingSelf-contained wiring compartment - eliminates additional boxesSeveral mounting styles are availableDesigned to mount onto existing bolt pattern installationsBase material-- die casting aluminum LM6Lamp housing—Polycarbonate, with good intensity and thermal stability and good finishing srufaceReflector - ABSOuter sealing material—waterproof seal gasketCombustibility rating : UL94V0IP protection : IP65Operating temperature : -40°C - +60°C, can withstand the most severe environmentsCan be flashed or steady burning (controller not supplied)Aviation red typeTypical LED lifetime : ≥100, 000 hrsAll LEDS are connected in parallel, which are powered by low voltage, constant current; when and if one LED fails, it will not affect other LEDSPower feeding part consists of two switching power supplies, which provides electricity to LEDS respectively(A1,A3,A5 and A2, A4, A6), when one power supply fails, it will not affect the other one, to ensure maximum life of the productWiringUnfasten two screws fixed on the nameplate and then remove the nameplate panelInsert the power cable and control from the gland box and then connect them to the corresponding terminals inside the lamp bodyVerify whether the power cable and the control cable are well connected before power onNoticeCheck whether the power cables are connected correctly before power onTemperature rise inside the control box is normal phenomenonPlease do not open the control box by yourselfThis product is a sealed structure; Should not be tampered with by anyone other than registered installerProduct FileModel: LM001On Stream Date: S. , 2008Applications: High building, tower, crane, high chimney, lighthouse, high voltage cable tower, oil well, etc.Standard: MH-T 6012-1999; ICAO Annex 14Certificate: CE certification, ICAO Patent:Utility model patents, Patent No.:ZL 2008 2 0153770.X
Order details:
Model | Voltage | Work Model | Photocell | Others |
LM001 | AC or DC | Flashing or Steady burning | With photocell or not | |
Please advise us your favor details of the product,we will offer for you ASAP
LM001(ICAO Medium Intensity Light and FAA--L864