1. Small-cam designed, the inertia of start-up is small and the speed is high.
2. The track with swallow-tailed cam prevents shuttles out.
3. Gear wheel reducer is connected straightly with the main electrical motor, high efficiency and long life. This solves the low efficiency problem of turbine speed reducer with moving strap and put an end to the hidden trouble that the swaying needle wheel reducer can’t resist shocking and can’t start with high frequency. This can reduce the energy consumption of the whole equipment and decrease the maintenance cost.
4. The dynamotor type weft detector is sensitive and reliable and cannot be influenced by dusts. It can stop automatically when weft ends. The yield of product is high.
5. The cam is lubricated circularly by force, this can promote the efficiency of the machine. It has oil route jam alarming device, avoiding abnormal wearing and tearing of the parts.
6. Turbine speed reducer for cloth rolling adopts flexible connections. This can prolong the life of the speed reducer.
7. It has higher speed than six-shuttle circular loom in the suitable fold diameter scope.
8. The structure of device is reasonable, simple and reliable. It is reliable to operate. The quick-wear parts are few. The maintenance is convenient. The revolving cost is low.
9. The electrical system is controlled by PLC.
Eight-shuttle circular loom technical parameters and performances
Power of main motor
Main speed reducer
Taper gear wheel speed reducer connected directly with the electrical motor
110mm(the face of track is plated with hard chromium)
1700-2200mm(best scope 1600-2000mm)
Number of warp
Density of weft
32-64pcs/100mm(changing weft density through changing gears)
Max Φ 120mm
Max Φ 90mm
Involution electrical motor
Max Φ 1100mm
Length statistics style
Mechanical three-shift length meter
Specs of shuttles
Φ38×230 or Φ38×270
Yarn plate specs
Initiative let-off(torque electrical motor 8kg.cm×2)
Let-off rubber covered roller
It stops automatically when warp breaks
Electrical motor style weft-end system
The cam is lubricated circularly by force through gear pump(oil is deposited and filtered by oil box); The draw runner of shuttles is lubricated through needle valve oil dripping
Oil route protection
It stops when oil route has jam
Contact person: Allen Wong
SBY-2200*8E plastic circular loom