Ads by Google
Model | MH-20W-E |
| Lighting Source Type | 20W |
| Input Voltage | 220V |
| Input voltage frequency | 50/60Hz |
| Input current | 0.1A |
| Input power | 22W |
| Start current | 0.25A |
| Instant voltage sag | 30% |
| Range of operating voltage | 220V±15% |
| Operating Temperature | -20°C~+50°C |
| power efficiency | 90% |
| Dimension(L×W×H)mm | 97×43×30 |
| Net weight | 0.09kg |
| Dimming | NO |
| Warranty | two years |
| Technical Description | ||
| .Professional patented control software , simple circuit and stable performance | ||
| ·Wide range of operation voltage, suitable for large voltage fluctuation circumstances | ||
| ·A little current to start, expansion of lamps life and reduction of original installation charge | ||
| ·Low voltage to start, suitable for low voltage circumstances | ||
| ·High efficiency >91%,remarkable effect of saving energy | ||
| ·High power factor, able to reduce initial installation cost | ||
| ·Able to insure the invariableness of out power even if input power fluctuates | ||
| ·Long line driven | ||
| ·High quality of illumination, no frequent flash | ||
| ·Low total harmonic distortion, little impact on power network | ||
| ·Full protection: protection for open loop, short loop and hot lamp restart | ||
| ·Low temperature rise, applicable to wind range of environmental temperature | ||
| ·Light body | ||
| ·Easy installation, without out-side starter, no compensation capacitor | ||
20W Electronic Ballast For MH /Commercial lightings