Ads by Google
SPECIFICATIONS:
Dia.of inlet pipe | G(1/2) ″ DM15 |
Dia.of out let pipe | G(1/2)″ DM15 |
Suitable water pressure | 0.05Mpa-0.8Mpa |
Best pressure | 0.1-0.3Mpa |
Power and voltage | DC.6V AC.220V-50/60Hz |
Power consumption in static | ≤5uA 4AA alkaline batteries lasts 2 years based on 300 cycles a day |
Power consumption | 0.5mW(DC) 2W(AC) |
Detection zone | Factory set 30cm(the data based on 30cm×30cm standard whiteboard,the inductive distance will be-adjusted by itself according to its environment) |
Ambient temperature | 0.1-45°C |
Degree of protection by enclosure | lp56 |
Cartridge durage | No leakage after 250000times using |
Corrosion tests | 120hours |
Life tests | 3 years for gurantee |
Serive | OEM welcome |
FEATURES AND FUNCTIONS
1.ECONOMIZE ON WATER: Flow automatically with in the range of reaction,useup and shut in water automatically.
2.SANITATION: Don't need to keep in touch with any position of machine when using,it flow and shut in water automatically.It is sanitation,avoiding bacterium's cross infection effectively.
3.INTELLIGENCE: Machine adopt microcomputer control, consist of one minute such as time such as washing,machine will imprison water automatically.Prevent from the foreign matter causes the water resource to be wasted within the range of reaction for a long time.
4.SAUE THE ELECTRICITY: The machine use 4 alkaline bettery No.5,and use it 200 times every day,does not need to change the battery within two years.
5.SAFEGUARD IT CONUENIENTLY: Set up water amount regulating valve and filter inside,it is comvenient to egulate water amount and drive the impurity out.
6.SUITABLE PLACE: Suitable for the hotel,the advanced office building,the family ,the public place.
7.USAGE:Water flows out once hand enters the detection zone. Once hand leaves the detection zone,water will be stopped automatically.
DELIVERY AND PAYMENTS OR PACKAGE:
We will allowed Ningbo(China) by sea ,30%T/T advance,70%T/T copy B/L,L/C at sight
Sensor faucet- tracert
The infrared sensors are the principles, When the hand on the infrared. the infrared infrared launch of human reflections shading in the infrared reception, Through integration within the microcomputer circuit of the signal is sent to the pulse solenoid valve, solenoid valve to signal the specified command to open the valve socket to control the tap water; When hand away the infrared sensors. solenoid valve not accept the signal. solenoid valve stem through the core of a clear spring water to control the water.
The use of induction attention
1.Ac power supply of tap is a security vulnerability, for safety reasons, there is leakage at the same time saver, must be a good grounding in frequent power outages, voltage instability of the place to use electricity in the toilet, all communication will affect their lifespan.
2.infrared sensors to the environment in the brightness and uncertain light, so the changes in the light and shade larger and to make light affects the inappropriate use.
3.Water quality, especially in sexual, clinging to sexual impurity much water environment all the inappropriate use. normal supply situation should be regularly rrit and the filter to the commission also should be in time to clean the filter.
Use in order to solve
1.When need water,it out of water. when needn't water,water is running
Appears that the failure is the intensity and frequency of the environment of the impact produced by it. the solution is the sensor for the adjustment knob or of the window paper, how to separate light from the outside world.
2.Opening slow and the retardation can't even close.
This reason many :sensor sensitivity, slow;the pressure of high;air valve stem and valve socket an adhesive or resistance to be a large;parichaya joint air valve ( and incoming air valve type ) parichaya up with a low voltage; or battery power. for the first one must decide to replace the sensor, the second as long as the manual pressure adjusting valve will be fine, as long as the "Do what you should do" you can.
3.Water is too small to even out of the water.
There are three reasons:air valve seize or manual pressure adjusting valve block;the internal network congestion;supply pressure not to reduce manifold
4.My induction in the battery life for the use of the product specifications, to change frequently.
This is because the battery life expectancy is the theory is used in particular conditions of the conclusions, and the actual conditions is a normal phenomenon. but if the actual have greater access to exaggerate the fact that the battery life.
Sensor faucet respond to the toilet flush or respond to the daily maintenance to pay attention to what the problem?
1. Often clean soft cloth products.
2. Avoid as to preclude the use of chemicals and alkaline.
3. Eliminate wired a ball, or nylon ball published plated parts and plastic parts
4. Eliminate hard substance of the product, the wind.
5. Directly to the product to preclude the use of water to wash.
6. Keep mesa the dry and prevent the constant damp conditions.
7. If Dc range of products and found all the lights flickered continuously should replace the battery.
8. Time to clean the filter to block, affect the normal use.
Economic Zhejiang Automatic Touch Sensor Kitchen Faucet(Mixer)