Ads by Google
LiFePO4 battery pack of 16Series 1Parallel
Packing | 51.2V 10Ah LiFePO4 Li-Ion rechargeable battery Module is made of 16 pcs of LiFePO4 Rechargeable Cell: 38120p (M size) Cell 3.2V 10 Ah, 100A Rate (LFP-38120P) in 16S configuration with 16 pcs of Battery Holder: 2 x M with 4 bases ,15 pcs of 60mm x 20mm connection plate & 1 PCM (60A limited) Acrylic Conformal Coating Technology applied for protect battery pack from Static Electric Shock Over-high pressure load Over-heat Moisture & Dust |
Voltage | Voltage: 51.2 (working) 58.4V (peak) 40 V ( cut-off) |
Capacity | 10Ah (512Wh) |
Cycle life | > 2000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) |
Protection | One PCM (60A limited) installed with the battery pack and protects the battery from Overcharge (> 58.4 V) Over discharge (<40 V) Over drain ( >60 Amp) Short circuits Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack. |
Energy Density | 76.41 Wh/Kg |
Prewired | Charge / Discharge terminal : 9" long 8 AWG open end wire Red = Positive Black = Negative |
Charging rate | 10A Max.. |
Discharging Rate | 60Amp limited by PCM installed |
Dimensions (LxWxH) | 318mm (12.5") x 158mm(6.2") x 138mm(5.4") |
Weight | 6700 grams (14.0 lbs 12.32 Oz) |
Smart Tips | Please use our charger below for fully recharge battery pack. Smart Charger (3.0A) for 51.2V LiFePO4 Battery Pack, 110-240V --- CE listed (4.7 hrs charging time)You may build a 51.2V 20Ah (1.024 Kwh,120A drain rate) by parallel two module together. ( Please select Qty = 2 for purchase) Must DIY with correct AWG wire. Please click here to view American Wire Gauge table and AWG Electrical Current Load Limits table listPlease charge each 51.2V 10Ah seperately. Please don't combine charge at one time |
Applications | Replace 48V Lead acid battery pack with less weight and longer cycle life Please make sure 58.4V peak voltage will be acceptable for your deviceForm a 204V, 10Ah battery pack by connecting 4 modules in series as a EV battery |
Warning | The battery holder may crack down from a heavy load applied, Batteryspace is not responsible for any damage cause by misuse. Please click Knowledge on LiFePO4 batteryto learn more detail |
* Characteristics subject to change without notice.
51.2V60A LiFePO4 Battery Pack(24S2P)