Welcome to ECVERY
battery analyzer
battery analyzer
Supplier Info
[China Supplier]
Contact Person : Mr. Chen Chuanhao
Tel : 86-020-86985899
Fax : 86-020-86985800
Product Detail
battery analyzer *barcode reading, *network data sharing, *batteryaas grading including battery capacity

battery analyzer*barcode reading, *network data sharing, *batteryaas grading including battery capacity

 Specifications:

1)       Model Differences

KT-FX128-L: channels: 128, KT-FX256-L: Channels: 256

Which uses batteries meeting grading conditions, and this model indicates with LED Lamp.

KT-FX128-Q channels: 128, KT-FX256-Q: channels: 256

Which uses batteries meeting grading conditions jacked up by cylinder, and this model indicates with LED Lamp.

2)  The system has barcode reading capability and data network transmission function.

3)  After being put into the grading equipment, the tray corresponds to each battery in tray, the indicator lamp should be set up in the system, and it is convenient for operator to identify and manually remove the battery.

4)  The tray correspond to each battery in tray, the optoelectronic sensor should be installed in the grading equipment, which is used for judging battery on-line state in real-time. When error operating (miss or mistaking, etc., an optical warning signal should be send out by the control system of the grading equipment to remind the operator.

5)  The pilot hole on panel is used for battery location in order to avoid battery fell down, due to positioning guide rod out of function.

6)  The grading can be set according to the requirements.

7)  Several ways of grading and combination should be conducted, such as capacity, internal resistance, voltage, shelving dropout voltage   and curve fitting, etc.

8) The system software has the function of data processing and analysis. It can set up grading rules independently, which can carry on a combination grading or independent grading. By using an open programming, the software can compile arbitrarily data of voltage, capacity and internal resistance, and set up corresponding grading conditions.

9) The software and hardware is chiefly characterized by the simple operation and high productivity.

10) Communication mode: RS-485, Baud rate is 57600bit/s.

11) Dimensions: about 780mm wide x 710 mm deep x 900 mm high.

12) Power Supply Source (reference):  voltage: AC POWER220 × (100%±10%) V; 100W   Frequency: 50Hz

Features:

Battery grading system with communication interface has barcode reading capabilities, and the information sharing will be realized through network. When the system works, battery’s grading will be completed by retrieving the data including battery capacity, internal resistance and open-circuit voltage of the corresponding tray and so on from the data terminal, according to the set grading conditions. 

Features:

Battery grading system with communication interface has barcode reading capabilities, and the information sharing will be realized through network. When the system works, battery’s grading will be completed by retrieving the data including battery capacity, internal resistance and open-circuit voltage of the corresponding tray and so on from the data terminal, according to the set grading conditions.

battery analyzer

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.