Welcome to ECVERY
PVC solid woven conveyor belt
PVC solid woven conveyor belt
Supplier Info
[China Supplier]
Contact Person : Mr. Xu Stephen
Tel : 0086-579-83888972
Fax : 0086-579-82322278
Product Detail
PVC Conveyor Belt: 1.Color: as per customers' requirements 2.Light weight 3.Good integrity 4.High tensile strength


1)Low stretch;

2)Low maintenance;




6)Impervious to moisture,acids,oils,gases,sunlight;

7)Excellent fastener holding;

8)Excellent resistance to tearing,peeling and impact;

9)Endless belt splicing;

10)Special wear resistant edge design;

The products consists of solid woven fabric dipped in PVC paste and adding PVC cover which are combined together

by vulcanizing.The belt is much suitable to service in the conditions needing fire resistant and anti-static properties

as coal mines,power stations,chemical and metallurgy industries.


Non pressed PVCPressed PVC

1)Non pressed PVC type is suitable for applications in dry conditions at a slope angle of no greater than 16 degrees. The belt  is non-pressed with cover no more than 0.8mm.

2)Pressed PVC type,boh top and bottom covers are PVC, thickness of each side can be up to 4mm,the belt has much more advantages than non pressed PVC belt on impact resistance,water soaking,with longer service life,higher fastener holding.

PVC solid woven conveyor belt

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.