Ads by Google
CNC Universal Coiling Spring Machine
Feature
1)Wire diameter:1.0--3.0mm
2) Equipped with the computer-controlled system imported from Taiwan and motor imported from Japan.
3) It is suitable for produce double torsion spring, straight spring, pagoda-shaped, compression
4)Two axis can work in high speed single -step or synchronously.
5)Computer interface displayed in Chinese and English makes which the operation easy.
Technique Parameter
| Model | XD-230 |
| wire diameter | 1.0--3.0mm |
| Max.O.D. | 50mm |
| Max Production Speed | 250pcs/min |
| Feed Length | Unlimited |
| Feed Speed | 1350m/min |
| Feed (Y)Axis(kw) | 3.8kw |
| Cam (Y)Axis (kw) | 2.7kw |
| Machine Dimensions | 120*120*170cm |
| Wooden Case Dimensions | 130*130*185cm |
| Machine Weights | 1200kgs |
| Gross Weighs | 1300kgs |
| Power | 220V 3P 50/60Hz |
Samples
Operating mechanism maintenance
1.Turn off the power.
2. In the use cotton fabric cleaning organization and the radio station the thing, and spreads guards against rust the thin oil.3. Slide precision slide object, do not use high-viscous oil, using only the slide oil lubrication, so as not to affect the linear movement of the slide.
4. Every six months separately to organization on 1-4 Yellow glib increase bearing grease. 5. Note: Do not use the air spray gun cleaning song hand and slide, in order to avoid the debris, dust and slide chute or the clearance of the rotary structure.
Gear-driven lubrication system
Gears lubrication of the system is divided into x and y axes, and the oil tank is just touching the tooth surface. Oil is not much more, so as to avoid motor oil and fuel tank for 6 months to check 1 timesEvery six months, the replacement cycle oil maintenance, and implemented in accordance with the following steps: Note: The new machine using the full 1000 hours, please be sure to update the new cycle oil.
Wire feeding system
To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor or encoder, resulting in mechanical damage.At least every six months for maintenance or in accordance with the number of machine production, and replace the line feed operation at the same time.Implementation of machine maintenance jobs, follow these steps:
1. Make sure the power is turned off.2. Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.
3. The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses OMEGA73 or same level lubricating oil) Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap
Dongguan Automatic CNC Universal Coiling Spring Machine