Ads by Google
W11s-16x6000 Roll bending machine Parameter: Upper roller adding pressure 270tons Max width of roll board 6000mm The length of working rolls 6100mm Max thickness of plate 16mm(carbon steel σs≤ 245Mpa) Max thickness of plate pre-bending 13mm(carbon steel ≤ 245Mpa) Up roll diameter ø 560mm. Down roll diameter ø 290mm Distance between two down rolls 550mm Support rolls: two groups Drive speed about 4.0m/min Hydraulic motor 15KW Main motor 37KW Moving motor 11KW This machine used to make the steel plate into barrel shapeCircular shapeConical sharp, etc. The upper roller can move vertically as well as horizontally, it can finish the pre-bending work and coiling work at the same machine. The upper roller is drum-type design, so it has the anti-deformation function. There is equipped the support rollers under the lower rollers it can help to coil the high precision products. The lower rollers are fixed symmetrically deployed relatively to upper roller, mechanical drive is employed for driving lower rollers. Upper roller ascends or descends at the central symmetric location of the lower rollers; The ascending and descending are hydraulic driven. Upper roller moves to the left or right position to prepare for pre-bending work, the shift position is controlled by the limited switches. The upper roller movement is PLC controlled and LCD display is employed for displacement. Hydraulic drive is employed for dumping and resetting of the reverse head unit. Moving control is employed for the control system; You can operation the machine at any position around the machine. ROM the indicator setting on the control box.
CNC hydraulic upper roller universal metal rolling machine