DW75NC single-head hydraulic bender parameters
Hydraulic automatic mandrel metal pipe bending machine
Main features: Body by welding; mechanical parts through assembly; imported hydraulic system and electronic control system.
1. Uses the microcomputer control, automatic bending2. Safety: the emergency stop button on the bending arm3. Dialogue operation, easy to study and understand4. High pipe-bending precision up to ±0.15°5. 1000 groups pipe-bending information storage, all angles work forms a coherent whole.6. The mandrel automatically in and out, saving much time7. Suitable for bending steel pipe, stainless steel pipe, copper pipe, aluminum pipe, etc.8. Can install auxiliary push die, low returning-core function, can bend thin pipes9. Special fitting: special mold, anti-wrinkle board, auxiliary push installation, etc.
Specification/Model | Unit | DW75NC | Remark |
Max bending capability | mm | Φ75×4 | 1. The Minimum bending diameter based on the pipe diameter |
Max bending radius | mm | R400 | 2.The Max bending diameter can accordingto the customers requirement |
Min bending radius | mm | R40 | 3.The Max length of mandrel can according to customers requirement |
Max bending angle | Degree | 190 |
|
Standard core length of wear | mm | 2800 |
|
Control system |
| microcomputer control |
|
Allow the number of tube elbow | Unit | 16 |
|
Store part number | Unit | 16×16 |
|
Power of oil motor | KW | 7.5 |
|
Max pressure of the system | Mpa | 12 |
|
Oil tank capacity | L | 250 |
|
Size | mm | 4000×1000×1100 |
|
Weight | Kg | 2000 |
|
DW75NC hydraulic manual tube bender