CNC Press Brake
Performance:
The main machine adopts the structure of WC67Y series hydraulic press brake;
Special CNC system for press brake(double axles);
The drive element of backgauge adopts imported ball screw and linear guideway.
Parameters:
Parameter | 100/3200 | 100/4000 | 125/3200 | 125/4000 | ||
Nominal pressure | KN | 1000 | 1000 | 1250 | 1250 | |
Length of working table | mm | 3200 | 4000 | 3200 | 4000 | |
Distance between uprights | mm | 2450 | 3090 | 2450 | 3090 | |
Throat depths | mm | 320 | 320 | 320 | 320 | |
Ram stroke | mm | 120 | 120 | 120 | 120 | |
Main motor power | KW | 7.5 | 7.5 | 7.5 | 7.5 | |
Outside Dimensions | L | mm | 3500 | 4300 | 3500 | 4300 |
W | mm | 1450 | 1500 | 1500 | 1500 | |
H | mm | 2150 | 2150 | 2200 | 2200 |
DA41 NC SYSTEM:
• High-definition LCD display; • Position control of slip stop;• Back gauge control; • Angles programming; • Moulds’ technical parameters are established; • Escaped materials control; • 100-step procedures; • 25 engineering steps for each procedure;• Face-installation; • Servo Control / Frequency Control /two speed AC motor control.
CNC Hydraulic Press Brake (DELEM DA41)