WC67Y-40/2500 Hydraulic bending machine Nominal pressure:400KN Bending length:2500mm

1. Main characteristics

 The rack adopts the strengthened rigid steel whole welding structure, which has the enough strength and rigidity. And through the aging treatment, the whole accuracy in the long term using will be ensured.

 It uses large machine tool and once processing method to do the precision finishing, and it can ensure the processing accuracy.

 The up and down movement of the slider is controlled by the two oil cylinders.

 The slider synchronous institution adopts mechanical torsion synchronization, and it is reliable.

 The slider is the up-moveable type and uses the lubrication guiderail without oil to achieve the automatic lubrication. And it is guided by the wear-resisting belt.

 The front and back movement of the electric back gauge is controlled by the T-type screw and polish rod.

 It is equipped with standard one set of upper and lower die.

 In order to the convenient of the storage and transport of the panel veneer, it is especially equipped with front material loading device.

 The machine hydraulic integrated system uses Haimen Xinli and the main oil cylinder seals uses VALQUA products, and the lower pressure electric elements use Schneider products to ensure the stability and the service life of the machine.

 Slide stroke has the electronic display.

 CNC-100 system.

2. Main specification

NO.	Item			Unit	Main specification
1		Nominal pressure		KN	400
2		Bending length		mm	2500
3		Distance between column		mm	2000
4		Slide stroke		mm	100
5		Max open height		mm	330
6		Depth of throat		mm	250
7		Slide motion speed	No-load	mm /s	55
8			working	mm /s	8
9			Return stroke	mm /s	60
10		Main motor power			4
11		Axial plunger pump			10

WC67Y-40/2500 Hydraulic bending machine