hydraulic elbow forming machine,elbow machine: 1.PLC control 2.for carbon steel and stainless steel

This series of elbow forming machine is mainly designed for cold forming carbon steel,stainless steel elbow with curvature of 1.0D to 1.5D and with diameter from 1/2 "to 20 ". These elbows are widely used in the connection of industrial of pipeline for the petrochemical,gas and oil pipes,electrical ,food,etcForming principle:pipe is push into forming cavity by ejector rod,the cavity is equipped with inner core,then strip by stripping device.Main features:1.good appearance and steady performance2.It has individual power construction and electrical system,adops PLC botton centralzed control,which can be conveniently adjuste and opereated both manually and automatically.

Forming principle:tube in the external cavity mode locking of the tunnel was hydraulic roof paragraph from the guide rod into the set up within the core of the forming chamber bending by the removal material ejection device,all adopt by PLC intelligent operation.

main technical parameter:

Item      Model	YKWT series elbow forming hydraulic press parameter (steel ball molding)
	Process capacity(inch)	Slider stroke(mm)	Workbench surface(mm)	Power of motor (KW)	Forming time(S)	Weight(T)
YKWT-63T/63T	1/2 " ~2"	400/180	450X400	5.5	15~20	2
YKWT-50TX2/80T	1 "~3 "	550/200	600X480	7.5	15~30	3
YKWT-63TX2/100T	1 "~4 "	600/250	600X500	7.5	20~25	3.7

Item      Model	YKWT series elbow forming hydraulic press parameter (mandril molding)
	Process capacity(inch)	Mold locking force(KN)	Mandril pushing force(KN)	Max working pressure(MPa)	Power of motor (KW)	Weight(T)
YKWT-100T	1/2 " ~3"	1000	630	28	11	7
YKWT-160T	1 "~4 "	1600	1000	28	14	11
YKWT-300T	2 "~6 "	3000	1500	28	18.5	15
YKWT-400T	4 "~8 "	4000	2000	28	22	21
YKWT-500T	5 "~10 "	5000	2500	28	30	32
YKWT-800T	6 "~12 "	8000	4000	28	44	41
YKWT-1000T	12 "~16 "	10000	5000	28	50	57
YKWT-1600T	16 "~20 "	16000	8000	28	65	90

YKWT -1000T hydraulic cold elbow forming machine