Juice Concentrator/Evaporator 1 Mainly for juice, milk , ketchup etc heat sensitve material evaporation 2 Aroma recovery

 Juice concentrator/evaporator

CHARACTERISTICS

We integrated the highlight of imported concentration equipment with that of the counterparts, based on the characteristics of the material, research and develop SJM type three- effect (double effect, single effect) falling-film continuous feeding concentrator. The equipment feature is as follows:(1)  Continuous  feeding  and  discharge,  stable and convenient operation. The only operation package of setting of different parameters at the beginning of feeding, assurance of reliable and stable feeding supply and easy regulation can certainly produce continuous, stable and efficient concentration, get qualified density and simultaneously recover solvent.(2) Large concentration density, (1.25-1.28), high heat efficiency and effective energy-saving fruit. To this system, we used optimum to leave a vaporization  heat  transmission  coefficient  of 3400-3800w(m2.k),which is very benefit to concentration of Chinese extraction liquid. The cause for it is that the material flows quickly with the form of film inside the acceleration pipe, and simultaneously,  the  temperature  difference  for heat  is  somewhat  small,  (just  8-10centigrade ).Thematerial can form quick flashing, the medicine liquid stays and be heated for short time; the adaptation scope of material viscidity is wide, (50-500cp); the even heating excludes crystallization, and then to deposition and even coke. So it features little destroy to effective element,  full  utilization  of  heat  energy  and fruitful energy-saving.(3). Convenient to employment of advanced control mode. The temperature index for series SJM concentration flow is mainly subject to the temperature  of  each of  effect. Each of parameter  keeps  stable  during  system performance, which benefits the utilization of advance control unit featuring (PLC and man- machine interface control) and leaves the lower cost of control equipment, makes the production of Chinese drug by automatic control great convenience.(4). Advanced and reasonable structure. We used optimum design scheme. Advanced distribution device   is   responsible   for   liquid   distribution during feeding and flow inside the pipe to make the material able to enter heating tube evenly. Simultaneously, the heating tube, made by qualified  and  imported  inner-wall  mirror  tube, can reduce the flow resistance to the material inside the tube, increase the flow speed, and prevent crystallization and deposition. To lift concentration efficiency, the advanced mist collector can eliminate mist. (5)With aroma recovery .

SPECIFICATION	LJN500	LJN1000	LJN1500	LJN2000	LJN3000		LJN5000	LJN6000	LJN8000
Evaporating capacity(kg/h)	500	1000	1500	2000	3000		5000	6000	8000...
Steam pressure(Mpa)	0.1~0.25
Steam cost(kg/h)	185	370	555	740	1110		1850	2220	2960
Recycling water cost(t/h)	5	10	13	15	18		25	30	40
Weight(kg0	2060	2480	3280	4200	4860		5770	6430	7600
Dimension(mm)	7080*900*3500	7680*1000*4000	8380*1100*4600	8890*1200*4600	9500*1300*4900		10200*1400*5300	10800*1500*5800	11500*1600*5800
		Vacuum degree(MPA)				Evaporation temperature(c)
First effect		-0.047~-0.052				80-85
Second effect		-0.069~-0.072				70-75
Third effect		-0.075~-0.081				60-65

 

3-effect falling film evaporator/concentrator